reference
Brand-neutral cutting tool reference: grade cross-reference, materials, turning starting values.
Sollte ich dies verwenden
Qualität und Sicherheit
Basierend auf einer automatisierten Analyse der Tool-Definitionen und der Einhaltung des Protokolls.
Kontextkosten
Dies ist die ungefähre Anzahl der Tokens, die jedes Mal verbraucht werden, wenn die Tools des Servers in den Kontext eines Modells geladen werden. Höhere Werte verringern die Aufmerksamkeit, die für andere Aufgaben verfügbar ist.
Installieren
Installation mit einem Klick
Fügen Sie dies Ihrer Datei `claude_desktop_config.json` hinzu:
{
"mcpServers": {
"reference": {
"url": "https://cuttingtoolsai.eu/mcp"
}
}
}Remote-Endpunkte
https://cuttingtoolsai.eu/mcpstreamable-httpWas es kann
Tool-Inventar
Tools (3)
🟡grade_cross_reference(grade, brand)
Cross-reference a carbide insert grade across manufacturers. Given any maker's grade (e.g. GC4325, KC5010, IC807), returns its ISO 513 application position(s) and the grades other manufacturers publish at the same position, each row carrying its verification status (multi-source consensus / confirmed by 2+ manufacturer charts / single-source chart). Comparable-at-ISO-position is a trial starting point, not an interchangeability guarantee.
Eingabe-Schema
{
"type": "object",
"properties": {
"grade": {
"type": "string",
"description": "The grade code to cross-reference, e.g. \"GC4325\" or \"KC5010\""
},
"brand": {
"type": "string",
"description": "Optional: the grade's manufacturer, to disambiguate codes used by several makers"
}
},
"required": [
"grade"
]
}⚪material_cross_reference(designation)
Cross-reference a workpiece material designation across standards (EN, Werkstoffnummer, AISI/ASTM/UNS, JIS) from a curated 77-material set, e.g. "1.4404" -> AISI 316L / X2CrNiMo17-12-2 / SUS316L. Each match includes the ISO 513 machining group, a machining note, and whether the pairing is a same-composition equivalent or a nearest commonly-cited counterpart. Always verify against the material certificate.
Eingabe-Schema
{
"type": "object",
"properties": {
"designation": {
"type": "string",
"description": "Any designation: EN name (42CrMo4), Werkstoffnummer (1.7225), AISI/UNS (4140, G41400), JIS (SCM440), or a common name (316L, Inconel 718)"
}
},
"required": [
"designation"
]
}⚪speeds_feeds_starting_values(iso_group)
Starting cutting-speed and feed ranges for coated-carbide TURNING by ISO 513 material group (P steel, M stainless, K cast iron, N aluminium, S_TI titanium, S_NI nickel superalloy, H hardened steel). These are deliberately wide practice ranges, not from any one catalog; the maker's data for the exact grade always wins.
Eingabe-Schema
{
"type": "object",
"properties": {
"iso_group": {
"type": "string",
"enum": [
"P",
"M",
"K",
"N",
"S_TI",
"S_NI",
"H"
],
"description": "ISO 513 group. Use S_TI for titanium, S_NI for nickel superalloys."
}
},
"required": [
"iso_group"
]
}Community
Nachweis