SmartTools
70+ free calculators & converters as MCP tools; each result links to its source page.
Sollte ich dies verwenden
Qualität und Sicherheit
A
Befunde (3)
- HIGHTool poisoning patterns detected
- MEDIUMTool 'lorem_ipsum' description contains placeholder textin lorem_ipsum
- INFOTool description contains placeholder or incomplete textin lorem_ipsum
Basierend auf einer automatisierten Analyse der Tool-Definitionen und der Einhaltung des Protokolls.
Kontextkosten
~12,680Tokens (Tool-Definitionen)
~1.5 KBTypische Antwortgröße
Erhebliche Auswirkung auf die Aufmerksamkeit (9.91% von 128k Kontext)
Dies ist die ungefähre Anzahl der Tokens, die jedes Mal verbraucht werden, wenn die Tools des Servers in den Kontext eines Modells geladen werden. Höhere Werte verringern die Aufmerksamkeit, die für andere Aufgaben verfügbar ist.
Installieren
Installation mit einem Klick
Fügen Sie dies Ihrer Datei `claude_desktop_config.json` hinzu:
{
"mcpServers": {
"smart-tools": {
"url": "https://smart-tools.xyz/mcp"
}
}
}Remote-Endpunkte
https://smart-tools.xyz/mcpstreamable-httpWas es kann
Tool-Inventar
Tools (74)
🟢 Nur lesen🟡 Schreiben🔴 Löschen⚪ Unbekannt
⚪length_converter(value, from, to, locale)
Convert a value between length units. Units: km (Kilometer), m (Meter), cm (Centimeter), mm (Millimeter), µm (Micrometer), mi (Mile), yd (Yard), ft (Foot), in (Inch), nmi (Nautical mile). Calculation runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"value": {
"type": [
"number",
"string"
],
"description": "Amount to convert"
},
"from": {
"type": "string",
"enum": [
"km",
"m",
"cm",
"mm",
"µm",
"mi",
"yd",
"ft",
"in",
"nmi"
],
"description": "Source unit id"
},
"to": {
"type": "string",
"enum": [
"km",
"m",
"cm",
"mm",
"µm",
"mi",
"yd",
"ft",
"in",
"nmi"
],
"description": "Target unit id"
},
"locale": {
"type": "string",
"description": "Language for source_url (en, de, es, fr, it, nl, uk)"
}
},
"required": [
"value",
"from",
"to"
],
"additionalProperties": false
}⚪weight_converter(value, from, to, locale)
Convert a value between weight units. Units: t (Tonne), kg (Kilogram), g (Gram), mg (Milligram), lb (Pound), oz (Ounce), st (Stone). Calculation runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"value": {
"type": [
"number",
"string"
],
"description": "Amount to convert"
},
"from": {
"type": "string",
"enum": [
"t",
"kg",
"g",
"mg",
"lb",
"oz",
"st"
],
"description": "Source unit id"
},
"to": {
"type": "string",
"enum": [
"t",
"kg",
"g",
"mg",
"lb",
"oz",
"st"
],
"description": "Target unit id"
},
"locale": {
"type": "string",
"description": "Language for source_url (en, de, es, fr, it, nl, uk)"
}
},
"required": [
"value",
"from",
"to"
],
"additionalProperties": false
}⚪temperature_converter(value, from, to, locale)
Convert a value between temperature units. Units: °C (Celsius), °F (Fahrenheit), K (Kelvin), °R (Rankine). Calculation runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"value": {
"type": [
"number",
"string"
],
"description": "Amount to convert"
},
"from": {
"type": "string",
"enum": [
"°C",
"°F",
"K",
"°R"
],
"description": "Source unit id"
},
"to": {
"type": "string",
"enum": [
"°C",
"°F",
"K",
"°R"
],
"description": "Target unit id"
},
"locale": {
"type": "string",
"description": "Language for source_url (en, de, es, fr, it, nl, uk)"
}
},
"required": [
"value",
"from",
"to"
],
"additionalProperties": false
}⚪area_converter(value, from, to, locale)
Convert a value between area units. Units: km² (Square kilometer), m² (Square meter), cm² (Square centimeter), mm² (Square millimeter), ha (Hectare), ac (Acre), mi² (Square mile), ft² (Square foot), yd² (Square yard), in² (Square inch). Calculation runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"value": {
"type": [
"number",
"string"
],
"description": "Amount to convert"
},
"from": {
"type": "string",
"enum": [
"km²",
"m²",
"cm²",
"mm²",
"ha",
"ac",
"mi²",
"ft²",
"yd²",
"in²"
],
"description": "Source unit id"
},
"to": {
"type": "string",
"enum": [
"km²",
"m²",
"cm²",
"mm²",
"ha",
"ac",
"mi²",
"ft²",
"yd²",
"in²"
],
"description": "Target unit id"
},
"locale": {
"type": "string",
"description": "Language for source_url (en, de, es, fr, it, nl, uk)"
}
},
"required": [
"value",
"from",
"to"
],
"additionalProperties": false
}⚪volume_converter(value, from, to, locale)
Convert a value between volume units. Units: m³ (Cubic meter), L (Liter), mL (Milliliter), gal_us (US gallon), gal_uk (UK gallon), qt (US quart), pt_us (US pint), pt_uk (UK pint), cup (US cup), fl oz (US fluid ounce). Calculation runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"value": {
"type": [
"number",
"string"
],
"description": "Amount to convert"
},
"from": {
"type": "string",
"enum": [
"m³",
"L",
"mL",
"gal_us",
"gal_uk",
"qt",
"pt_us",
"pt_uk",
"cup",
"fl oz"
],
"description": "Source unit id"
},
"to": {
"type": "string",
"enum": [
"m³",
"L",
"mL",
"gal_us",
"gal_uk",
"qt",
"pt_us",
"pt_uk",
"cup",
"fl oz"
],
"description": "Target unit id"
},
"locale": {
"type": "string",
"description": "Language for source_url (en, de, es, fr, it, nl, uk)"
}
},
"required": [
"value",
"from",
"to"
],
"additionalProperties": false
}⚪speed_converter(value, from, to, locale)
Convert a value between speed units. Units: m/s (Meter per second), km/h (Kilometer per hour), mph (Mile per hour), ft/s (Foot per second), kn (Knot). Calculation runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"value": {
"type": [
"number",
"string"
],
"description": "Amount to convert"
},
"from": {
"type": "string",
"enum": [
"m/s",
"km/h",
"mph",
"ft/s",
"kn"
],
"description": "Source unit id"
},
"to": {
"type": "string",
"enum": [
"m/s",
"km/h",
"mph",
"ft/s",
"kn"
],
"description": "Target unit id"
},
"locale": {
"type": "string",
"description": "Language for source_url (en, de, es, fr, it, nl, uk)"
}
},
"required": [
"value",
"from",
"to"
],
"additionalProperties": false
}⚪pressure_converter(value, from, to, locale)
Convert a value between pressure units. Units: Pa (Pascal), kPa (Kilopascal), hPa (Hectopascal), bar (Bar), atm (Atmosphere), psi (Pound per sq inch), mmHg (Millimeter of mercury), inHg (Inch of mercury). Calculation runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"value": {
"type": [
"number",
"string"
],
"description": "Amount to convert"
},
"from": {
"type": "string",
"enum": [
"Pa",
"kPa",
"hPa",
"bar",
"atm",
"psi",
"mmHg",
"inHg"
],
"description": "Source unit id"
},
"to": {
"type": "string",
"enum": [
"Pa",
"kPa",
"hPa",
"bar",
"atm",
"psi",
"mmHg",
"inHg"
],
"description": "Target unit id"
},
"locale": {
"type": "string",
"description": "Language for source_url (en, de, es, fr, it, nl, uk)"
}
},
"required": [
"value",
"from",
"to"
],
"additionalProperties": false
}⚪angle_converter(value, from, to, locale)
Convert a value between angle units. Units: ° (Degree), rad (Radian), grad (Gradian), mrad (Milliradian), rev (Turn), ′ (Arcminute), ″ (Arcsecond). Calculation runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"value": {
"type": [
"number",
"string"
],
"description": "Amount to convert"
},
"from": {
"type": "string",
"enum": [
"°",
"rad",
"grad",
"mrad",
"rev",
"′",
"″"
],
"description": "Source unit id"
},
"to": {
"type": "string",
"enum": [
"°",
"rad",
"grad",
"mrad",
"rev",
"′",
"″"
],
"description": "Target unit id"
},
"locale": {
"type": "string",
"description": "Language for source_url (en, de, es, fr, it, nl, uk)"
}
},
"required": [
"value",
"from",
"to"
],
"additionalProperties": false
}⚪energy_converter(value, from, to, locale)
Convert a value between energy units. Units: J (Joule), kJ (Kilojoule), cal (Calorie), kcal (Kilocalorie), Wh (Watt-hour), kWh (Kilowatt-hour), BTU (British thermal unit), ft·lb (Foot-pound), eV (Electronvolt). Calculation runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"value": {
"type": [
"number",
"string"
],
"description": "Amount to convert"
},
"from": {
"type": "string",
"enum": [
"J",
"kJ",
"cal",
"kcal",
"Wh",
"kWh",
"BTU",
"ft·lb",
"eV"
],
"description": "Source unit id"
},
"to": {
"type": "string",
"enum": [
"J",
"kJ",
"cal",
"kcal",
"Wh",
"kWh",
"BTU",
"ft·lb",
"eV"
],
"description": "Target unit id"
},
"locale": {
"type": "string",
"description": "Language for source_url (en, de, es, fr, it, nl, uk)"
}
},
"required": [
"value",
"from",
"to"
],
"additionalProperties": false
}⚪data_converter(value, from, to, locale)
Convert a value between data units. Units: bit (Bit), B (Byte), kB (Kilobyte), MB (Megabyte), GB (Gigabyte), TB (Terabyte), KiB (Kibibyte), MiB (Mebibyte), GiB (Gibibyte), TiB (Tebibyte). Calculation runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"value": {
"type": [
"number",
"string"
],
"description": "Amount to convert"
},
"from": {
"type": "string",
"enum": [
"bit",
"B",
"kB",
"MB",
"GB",
"TB",
"KiB",
"MiB",
"GiB",
"TiB"
],
"description": "Source unit id"
},
"to": {
"type": "string",
"enum": [
"bit",
"B",
"kB",
"MB",
"GB",
"TB",
"KiB",
"MiB",
"GiB",
"TiB"
],
"description": "Target unit id"
},
"locale": {
"type": "string",
"description": "Language for source_url (en, de, es, fr, it, nl, uk)"
}
},
"required": [
"value",
"from",
"to"
],
"additionalProperties": false
}⚪time_converter(value, from, to, locale)
Convert a value between time units. Units: µs (Microsecond), ms (Millisecond), s (Second), min (Minute), h (Hour), d (Day), wk (Week), mo (Month), yr (Year). Calculation runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"value": {
"type": [
"number",
"string"
],
"description": "Amount to convert"
},
"from": {
"type": "string",
"enum": [
"µs",
"ms",
"s",
"min",
"h",
"d",
"wk",
"mo",
"yr"
],
"description": "Source unit id"
},
"to": {
"type": "string",
"enum": [
"µs",
"ms",
"s",
"min",
"h",
"d",
"wk",
"mo",
"yr"
],
"description": "Target unit id"
},
"locale": {
"type": "string",
"description": "Language for source_url (en, de, es, fr, it, nl, uk)"
}
},
"required": [
"value",
"from",
"to"
],
"additionalProperties": false
}⚪loan_calculator(principal, annual_rate, years, locale)
Monthly payment, total repayment and interest for an amortising loan (annuity formula). Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"principal": {
"type": [
"number",
"string"
],
"description": "Loan amount"
},
"annual_rate": {
"type": [
"number",
"string"
],
"description": "Annual interest rate, percent"
},
"years": {
"type": [
"number",
"string"
],
"description": "Term in years"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"principal",
"annual_rate",
"years"
],
"additionalProperties": false
}⚪mortgage_calculator(home_price, annual_rate, years, down_payment_pct, annual_tax, ...)
Monthly mortgage payment including optional down payment, property tax and insurance (PITI). Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"home_price": {
"type": [
"number",
"string"
],
"description": "Property price"
},
"annual_rate": {
"type": [
"number",
"string"
],
"description": "Annual interest rate, percent"
},
"years": {
"type": [
"number",
"string"
],
"description": "Term in years"
},
"down_payment_pct": {
"type": [
"number",
"string"
],
"description": "Down payment, percent (default 0)"
},
"annual_tax": {
"type": [
"number",
"string"
],
"description": "Annual property tax (default 0)"
},
"annual_insurance": {
"type": [
"number",
"string"
],
"description": "Annual insurance (default 0)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"home_price",
"annual_rate",
"years"
],
"additionalProperties": false
}⚪compound_interest_calculator(principal, annual_rate, years, compounds_per_year, locale)
Future balance and interest earned: A = P(1 + r/n)^(nt). Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"principal": {
"type": [
"number",
"string"
],
"description": "Starting amount"
},
"annual_rate": {
"type": [
"number",
"string"
],
"description": "Annual rate, percent"
},
"years": {
"type": [
"number",
"string"
],
"description": "Number of years"
},
"compounds_per_year": {
"type": [
"number",
"string"
],
"description": "Compounding periods per year (default 12)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"principal",
"annual_rate",
"years"
],
"additionalProperties": false
}🔴vat_calculator(amount, rate, direction, locale)
Add VAT to a net amount or remove it from a gross amount. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"amount": {
"type": [
"number",
"string"
],
"description": "The amount"
},
"rate": {
"type": [
"number",
"string"
],
"description": "VAT rate, percent"
},
"direction": {
"type": "string",
"enum": [
"add",
"remove"
],
"description": "add: amount is net → gross; remove: amount is gross → net (default add)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"amount",
"rate"
],
"additionalProperties": false
}⚪tip_calculator(bill, tip_rate, people, locale)
Tip amount, total and per-person split for a bill. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"bill": {
"type": [
"number",
"string"
],
"description": "Bill amount"
},
"tip_rate": {
"type": [
"number",
"string"
],
"description": "Tip, percent"
},
"people": {
"type": [
"number",
"string"
],
"description": "Number of people to split between (default 1)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"bill",
"tip_rate"
],
"additionalProperties": false
}⚪discount_calculator(price, discount, second_discount, locale)
Final price after one or two successive discounts, plus amount saved. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"price": {
"type": [
"number",
"string"
],
"description": "Original price"
},
"discount": {
"type": [
"number",
"string"
],
"description": "Discount, percent"
},
"second_discount": {
"type": [
"number",
"string"
],
"description": "Optional second discount applied to the already-reduced price, percent"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"price",
"discount"
],
"additionalProperties": false
}🟡percentage_calculator(operation, a, b, locale)
Percentage operations. operation=percent_of: a% of b. operation=is_what_percent: a is what % of b. operation=change: percent change from a to b. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"operation": {
"type": "string",
"enum": [
"percent_of",
"is_what_percent",
"change"
],
"description": "Which calculation"
},
"a": {
"type": [
"number",
"string"
],
"description": "First number"
},
"b": {
"type": [
"number",
"string"
],
"description": "Second number"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"operation",
"a",
"b"
],
"additionalProperties": false
}⚪salary_calculator(amount, period, hours_per_week, weeks_per_year, locale)
Convert pay between hourly, daily, weekly, biweekly, monthly and annual. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"amount": {
"type": [
"number",
"string"
],
"description": "Pay amount"
},
"period": {
"type": "string",
"enum": [
"hourly",
"daily",
"weekly",
"biweekly",
"monthly",
"annual"
],
"description": "Period the amount refers to"
},
"hours_per_week": {
"type": [
"number",
"string"
],
"description": "Working hours per week (default 40)"
},
"weeks_per_year": {
"type": [
"number",
"string"
],
"description": "Paid weeks per year (default 52)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"amount",
"period"
],
"additionalProperties": false
}⚪margin_calculator(cost, price, locale)
Profit, margin (share of price) and markup (share of cost) from cost and selling price. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"cost": {
"type": [
"number",
"string"
],
"description": "Cost price"
},
"price": {
"type": [
"number",
"string"
],
"description": "Selling price"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"cost",
"price"
],
"additionalProperties": false
}⚪unit_price_calculator(price_a, quantity_a, price_b, quantity_b, locale)
Compare price per unit of two packs and report which is cheaper. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"price_a": {
"type": [
"number",
"string"
],
"description": "Price of pack A"
},
"quantity_a": {
"type": [
"number",
"string"
],
"description": "Quantity in pack A"
},
"price_b": {
"type": [
"number",
"string"
],
"description": "Price of pack B"
},
"quantity_b": {
"type": [
"number",
"string"
],
"description": "Quantity in pack B"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"price_a",
"quantity_a",
"price_b",
"quantity_b"
],
"additionalProperties": false
}⚪fuel_cost_calculator(distance, consumption, fuel_price, system, locale)
Fuel needed and trip cost. system=metric: distance km, consumption L/100km. system=imperial: distance miles, consumption mpg. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"distance": {
"type": [
"number",
"string"
],
"description": "Trip distance"
},
"consumption": {
"type": [
"number",
"string"
],
"description": "L/100km (metric) or mpg (imperial)"
},
"fuel_price": {
"type": [
"number",
"string"
],
"description": "Price per litre or per gallon"
},
"system": {
"type": "string",
"enum": [
"metric",
"imperial"
],
"description": "Unit system (default metric)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"distance",
"consumption",
"fuel_price"
],
"additionalProperties": false
}⚪electricity_cost_calculator(power_watts, hours_per_day, price_per_kwh, locale)
Running cost of an appliance per day, month and year from its wattage. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"power_watts": {
"type": [
"number",
"string"
],
"description": "Power draw in watts"
},
"hours_per_day": {
"type": [
"number",
"string"
],
"description": "Hours used per day"
},
"price_per_kwh": {
"type": [
"number",
"string"
],
"description": "Electricity price per kWh"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"power_watts",
"hours_per_day",
"price_per_kwh"
],
"additionalProperties": false
}⚪bmi_calculator(system, weight_kg, height_cm, weight_lb, height_ft, ...)
Body Mass Index and category. system=metric: weight_kg, height_cm. system=imperial: weight_lb, height_ft (+height_in). Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"system": {
"type": "string",
"enum": [
"metric",
"imperial"
],
"description": "Unit system (default metric)"
},
"weight_kg": {
"type": [
"number",
"string"
],
"description": "Weight in kg (metric)"
},
"height_cm": {
"type": [
"number",
"string"
],
"description": "Height in cm (metric)"
},
"weight_lb": {
"type": [
"number",
"string"
],
"description": "Weight in lb (imperial)"
},
"height_ft": {
"type": [
"number",
"string"
],
"description": "Height feet part (imperial)"
},
"height_in": {
"type": [
"number",
"string"
],
"description": "Height inches part (imperial, default 0)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [],
"additionalProperties": false
}⚪bmr_calculator(sex, age, height_cm, weight_kg, activity, ...)
Basal metabolic rate (Mifflin–St Jeor) and daily calories (TDEE = BMR × activity). Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"sex": {
"type": "string",
"enum": [
"m",
"f"
],
"description": "Biological sex"
},
"age": {
"type": [
"number",
"string"
],
"description": "Age in years"
},
"height_cm": {
"type": [
"number",
"string"
],
"description": "Height in cm"
},
"weight_kg": {
"type": [
"number",
"string"
],
"description": "Weight in kg"
},
"activity": {
"type": [
"number",
"string"
],
"description": "Activity multiplier: 1.2 sedentary, 1.375 light, 1.55 moderate, 1.725 active, 1.9 very active (default 1.2)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"sex",
"age",
"height_cm",
"weight_kg"
],
"additionalProperties": false
}⚪body_fat_calculator(sex, height_cm, neck_cm, waist_cm, hip_cm, ...)
Body fat percentage by the US Navy (Hodgdon–Beckett) method, metric measurements in cm. Females require hip_cm. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"sex": {
"type": "string",
"enum": [
"m",
"f"
],
"description": "Biological sex"
},
"height_cm": {
"type": [
"number",
"string"
],
"description": "Height in cm"
},
"neck_cm": {
"type": [
"number",
"string"
],
"description": "Neck circumference in cm"
},
"waist_cm": {
"type": [
"number",
"string"
],
"description": "Waist circumference in cm"
},
"hip_cm": {
"type": [
"number",
"string"
],
"description": "Hip circumference in cm (required for female)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"sex",
"height_cm",
"neck_cm",
"waist_cm"
],
"additionalProperties": false
}⚪ideal_weight_calculator(sex, height_cm, locale)
Healthy weight range (BMI 18.5–24.9) plus Devine, Robinson, Miller and Hamwi formula estimates, from height in cm. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"sex": {
"type": "string",
"enum": [
"m",
"f"
],
"description": "Biological sex"
},
"height_cm": {
"type": [
"number",
"string"
],
"description": "Height in cm"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"sex",
"height_cm"
],
"additionalProperties": false
}⚪due_date_calculator(last_period, cycle_length, locale)
Estimated due date by Naegele's rule (+280 days from last period, adjusted for cycle length). Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"last_period": {
"type": "string",
"description": "First day of last menstrual period, YYYY-MM-DD"
},
"cycle_length": {
"type": [
"number",
"string"
],
"description": "Average cycle length in days (default 28)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"last_period"
],
"additionalProperties": false
}⚪age_calculator(birth_date, at_date, locale)
Exact age in years, months and days between a birth date and a reference date (default: today). Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"birth_date": {
"type": "string",
"description": "Date of birth, YYYY-MM-DD"
},
"at_date": {
"type": "string",
"description": "Reference date, YYYY-MM-DD (default: today)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"birth_date"
],
"additionalProperties": false
}⚪date_difference_calculator(start_date, end_date, locale)
Difference between two dates: calendar years/months/days, total days, weeks and weekday count. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"start_date": {
"type": "string",
"description": "Start date, YYYY-MM-DD"
},
"end_date": {
"type": "string",
"description": "End date, YYYY-MM-DD"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"start_date",
"end_date"
],
"additionalProperties": false
}⚪hours_calculator(start, end, break_minutes, hourly_rate, locale)
Time worked between two clock times (handles overnight), minus a break, with optional pay. Times as HH:MM. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"start": {
"type": "string",
"description": "Start time HH:MM (24h)"
},
"end": {
"type": "string",
"description": "End time HH:MM (24h)"
},
"break_minutes": {
"type": [
"number",
"string"
],
"description": "Unpaid break in minutes (default 0)"
},
"hourly_rate": {
"type": [
"number",
"string"
],
"description": "Optional pay rate per hour"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"start",
"end"
],
"additionalProperties": false
}⚪aspect_ratio_calculator(width, height, new_width, new_height, locale)
Simplify a width×height ratio and scale to a new width or height. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"width": {
"type": [
"number",
"string"
],
"description": "Original width"
},
"height": {
"type": [
"number",
"string"
],
"description": "Original height"
},
"new_width": {
"type": [
"number",
"string"
],
"description": "Optional: target width → returns matching height"
},
"new_height": {
"type": [
"number",
"string"
],
"description": "Optional: target height → returns matching width"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"width",
"height"
],
"additionalProperties": false
}🟢standard_deviation_calculator(values, locale)
Mean, variance and standard deviation (both sample and population) of a list of numbers. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"values": {
"type": "array",
"items": {
"type": [
"number",
"string"
]
},
"description": "The data set (at least 2 numbers)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"values"
],
"additionalProperties": false
}⚪fraction_calculator(a, b, operator, c, d, ...)
Exact arithmetic on two fractions (a/b op c/d), reduced to lowest terms. op is one of + - * /. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"a": {
"type": [
"number",
"string"
],
"description": "Numerator of first fraction (integer)"
},
"b": {
"type": [
"number",
"string"
],
"description": "Denominator of first fraction (integer)"
},
"operator": {
"type": "string",
"enum": [
"+",
"-",
"*",
"/"
],
"description": "Operation"
},
"c": {
"type": [
"number",
"string"
],
"description": "Numerator of second fraction (integer)"
},
"d": {
"type": [
"number",
"string"
],
"description": "Denominator of second fraction (integer)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"a",
"b",
"operator",
"c",
"d"
],
"additionalProperties": false
}⚪triangle_calculator(mode, a, b, c, angle_c, ...)
Solve a triangle. mode=sss: three sides a,b,c. mode=sas: two sides a,b and the included angle angle_c (degrees). Returns sides, angles (degrees), area and perimeter. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"mode": {
"type": "string",
"enum": [
"sss",
"sas"
],
"description": "sss = three sides; sas = two sides + included angle"
},
"a": {
"type": [
"number",
"string"
],
"description": "Side a"
},
"b": {
"type": [
"number",
"string"
],
"description": "Side b"
},
"c": {
"type": [
"number",
"string"
],
"description": "Side c (mode sss)"
},
"angle_c": {
"type": [
"number",
"string"
],
"description": "Included angle C in degrees (mode sas)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"mode",
"a",
"b"
],
"additionalProperties": false
}⚪pace_calculator(distance, unit, hours, minutes, seconds, ...)
Running pace per km and per mile, plus speed, from distance and time. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"distance": {
"type": [
"number",
"string"
],
"description": "Distance covered"
},
"unit": {
"type": "string",
"enum": [
"km",
"mi"
],
"description": "Distance unit (default km)"
},
"hours": {
"type": [
"number",
"string"
],
"description": "Hours part of the time (default 0)"
},
"minutes": {
"type": [
"number",
"string"
],
"description": "Minutes part of the time (default 0)"
},
"seconds": {
"type": [
"number",
"string"
],
"description": "Seconds part of the time (default 0)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"distance"
],
"additionalProperties": false
}🟢subnet_calculator(ip, prefix, locale)
IPv4 subnet details: network, broadcast, mask, wildcard, host range and count for an IP and prefix. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"ip": {
"type": "string",
"description": "IPv4 address, optionally with /prefix (e.g. 10.0.0.1 or 10.0.0.1/8)"
},
"prefix": {
"type": [
"number",
"string"
],
"description": "CIDR prefix 0–32 (ignored if given in ip)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"ip"
],
"additionalProperties": false
}⚪color_converter(color, locale)
Convert a color between HEX, RGB and HSL. Accepts #hex, rgb()/rgba(), hsl()/hsla(). Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"color": {
"type": "string",
"description": "Color in any of: #1a7f5a, rgb(26,127,90), hsl(154,66%,30%)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"color"
],
"additionalProperties": false
}⚪gpa_calculator(courses, locale)
Weighted grade point average from letter grades (US 4.0 scale, +/-) or numeric grade points and credit hours. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"courses": {
"type": "array",
"description": "Each course as { grade, credits }. grade is a letter (A, A-, B+ …) or numeric grade points (0–4.5); credits defaults to 1.",
"items": {
"type": "object",
"properties": {
"grade": {
"type": [
"string",
"number"
],
"description": "Letter grade or grade points"
},
"credits": {
"type": [
"number",
"string"
],
"description": "Credit hours (default 1)"
}
},
"required": [
"grade"
]
}
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"courses"
],
"additionalProperties": false
}⚪scientific_calculator(expression, locale)
Evaluate a math expression with correct order of operations: + - * / % ^, parentheses, and functions (sqrt, sin, cos, tan, ln, log, exp, min, max, factorial via !). Constants pi, e. Angles in radians. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"expression": {
"type": "string",
"description": "Math expression, e.g. \"2+3*sqrt(16)\" or \"sin(pi/6)\". Operators + - * / % ^ (% is remainder, ^ is power), functions sqrt/cbrt/abs/ln/log/log2/exp/sin/cos/tan/asin/acos/atan/sinh/cosh/tanh/round/floor/ceil/sign/deg/rad/min/max/mod/pow/hypot, factorial via trailing !, constants pi/e/tau. Angles in radians."
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"expression"
],
"additionalProperties": false
}⚪height_converter(cm, feet, inches, locale)
Convert a height between centimetres and feet/inches. Give cm, or feet (with optional inches). One inch = 2.54 cm exactly. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"cm": {
"type": [
"number",
"string"
],
"description": "Height in centimetres (give this OR feet/inches)"
},
"feet": {
"type": [
"number",
"string"
],
"description": "Feet part (give this side instead of cm)"
},
"inches": {
"type": [
"number",
"string"
],
"description": "Inches part, used with feet (default 0)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [],
"additionalProperties": false
}⚪base64(text, direction, url_safe, locale)
Encode text to Base64 or decode Base64 back to text, UTF-8 safe, with an optional URL-safe alphabet. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "Text to encode, or Base64 to decode"
},
"direction": {
"type": "string",
"enum": [
"encode",
"decode"
],
"description": "encode (default) or decode"
},
"url_safe": {
"type": "boolean",
"description": "Use URL-safe alphabet (-_ instead of +/, no padding). Default false"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"text"
],
"additionalProperties": false
}⚪case_converter(text, case, locale)
Convert text to UPPER, lower, Title, Sentence, camelCase, PascalCase, snake_case, kebab-case or CONSTANT_CASE. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "Text to convert"
},
"case": {
"type": "string",
"enum": [
"upper",
"lower",
"title",
"sentence",
"camel",
"pascal",
"snake",
"kebab",
"constant"
],
"description": "Target case"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"text",
"case"
],
"additionalProperties": false
}⚪html_entities(text, direction, encode_all, locale)
Escape the five special HTML characters (optionally all non-ASCII) or decode named and numeric HTML entities back to text. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "Text to encode, or HTML with entities to decode"
},
"direction": {
"type": "string",
"enum": [
"encode",
"decode"
],
"description": "encode (default) or decode"
},
"encode_all": {
"type": "boolean",
"description": "When encoding, also convert every non-ASCII character to a numeric entity. Default false"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"text"
],
"additionalProperties": false
}⚪url_encoder(text, direction, mode, locale)
Percent-encode or decode a URL. mode=component escapes /?&= (for a value); mode=full keeps them (for a whole address). Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "Text or URL to encode/decode"
},
"direction": {
"type": "string",
"enum": [
"encode",
"decode"
],
"description": "encode (default) or decode"
},
"mode": {
"type": "string",
"enum": [
"component",
"full"
],
"description": "component (default) uses encodeURIComponent; full uses encodeURI"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"text"
],
"additionalProperties": false
}⚪slug_generator(text, separator, locale)
Turn text (incl. Ukrainian and accented Latin) into a clean URL slug; each non-empty line becomes its own slug. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "Text to slugify (one slug per line)"
},
"separator": {
"type": "string",
"enum": [
"-",
"_"
],
"description": "Word separator, - (default) or _"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"text"
],
"additionalProperties": false
}🔴remove_duplicates(text, trim, ignore_case, sort, only_duplicates, ...)
Remove duplicate lines, with optional trim, case-insensitive matching, sorting or keeping only the duplicated lines. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "Input lines"
},
"trim": {
"type": "boolean",
"description": "Trim whitespace on each line (default true)"
},
"ignore_case": {
"type": "boolean",
"description": "Match case-insensitively (default false)"
},
"sort": {
"type": "boolean",
"description": "Sort the result (default false)"
},
"only_duplicates": {
"type": "boolean",
"description": "Keep only lines that appeared more than once (default false)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"text"
],
"additionalProperties": false
}🟢text_counter(text, locale)
Count characters (with and without spaces), words, lines, paragraphs and estimated reading time. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "Text to measure"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"text"
],
"additionalProperties": false
}⚪text_diff(a, b, trim, ignore_case, locale)
Line-level diff of two texts (LCS): counts of added/removed lines plus a marked-up line list. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"a": {
"type": "string",
"description": "First (original) text"
},
"b": {
"type": "string",
"description": "Second (changed) text"
},
"trim": {
"type": "boolean",
"description": "Trim each line before comparing (default true)"
},
"ignore_case": {
"type": "boolean",
"description": "Compare case-insensitively (default false)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"a",
"b"
],
"additionalProperties": false
}⚪lorem_ipsum(count, unit, start_lorem, locale)
Generate placeholder lorem ipsum text by paragraphs, sentences or words. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"count": {
"type": [
"number",
"string"
],
"description": "How many units to generate (default 3)"
},
"unit": {
"type": "string",
"enum": [
"paragraphs",
"sentences",
"words"
],
"description": "paragraphs (default), sentences or words"
},
"start_lorem": {
"type": "boolean",
"description": "Begin with the classic 'Lorem ipsum dolor sit amet…' (default true)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [],
"additionalProperties": false
}⚪number_base(value, from_base, to_base, locale)
Convert an integer between bases 2–36 (binary, octal, decimal, hex and more), exact for 64-bit values via BigInt. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"value": {
"type": [
"string",
"number"
],
"description": "The integer to convert (may use 0x/0b/0o prefix, spaces or _ as separators)"
},
"from_base": {
"type": [
"number",
"string"
],
"description": "Base of the input, 2–36"
},
"to_base": {
"type": [
"number",
"string"
],
"description": "Base to convert to, 2–36"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"value",
"from_base"
],
"additionalProperties": false
}⚪timestamp_converter(value, direction, locale)
Convert between a Unix timestamp and an ISO 8601 date (UTC). direction=to_date: epoch → date; to_timestamp: date → epoch. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"value": {
"type": [
"string",
"number"
],
"description": "Epoch (seconds or ms) for to_date, or an ISO/date string for to_timestamp"
},
"direction": {
"type": "string",
"enum": [
"to_date",
"to_timestamp"
],
"description": "to_date: epoch → ISO; to_timestamp: date string → epoch. Auto-detected if omitted."
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"value"
],
"additionalProperties": false
}⚪transliteration(text, locale)
Transliterate Ukrainian Cyrillic to Latin by the official KMU #55 passport standard. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "Ukrainian text to transliterate"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"text"
],
"additionalProperties": false
}⚪uuid_generator(count, locale)
Generate one or more random version 4 (RFC 4122) UUIDs. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"count": {
"type": [
"number",
"string"
],
"description": "How many UUIDs to generate, 1–1000 (default 1)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [],
"additionalProperties": false
}⚪hash_generator(text, algorithm, locale)
Hash text with SHA-1, SHA-256, SHA-384 or SHA-512 (hex, over UTF-8 bytes). MD5 is not supported. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "The text to hash"
},
"algorithm": {
"type": "string",
"enum": [
"SHA-1",
"SHA-256",
"SHA-384",
"SHA-512"
],
"description": "Hash algorithm (default SHA-256)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"text"
],
"additionalProperties": false
}⚪jwt_decoder(token, locale)
Decode a JSON Web Token's header and payload (base64url). Does NOT verify the signature — that needs the secret/key. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"token": {
"type": "string",
"description": "The JWT (header.payload.signature)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"token"
],
"additionalProperties": false
}🟢cron_parser(expression, locale)
Parse a 5-field cron expression (minute hour day-of-month month day-of-week) into a plain-English description. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"expression": {
"type": "string",
"description": "Cron expression, e.g. \"*/15 9-17 * * 1-5\" (aliases like @daily accepted)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"expression"
],
"additionalProperties": false
}⚪regex_tester(pattern, flags, text, locale)
Test a JavaScript regular expression against text and return every match with its captured groups. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"pattern": {
"type": "string",
"description": "The regular expression source (no delimiters)"
},
"flags": {
"type": "string",
"description": "Regex flags, any of gimsuy (default g)"
},
"text": {
"type": "string",
"description": "The text to test against"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"pattern",
"text"
],
"additionalProperties": false
}⚪layout_fixer(text, direction, locale)
Fix text typed in the wrong keyboard layout between English QWERTY and Ukrainian ЙЦУКЕН. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "The garbled text"
},
"direction": {
"type": "string",
"enum": [
"en_to_uk",
"uk_to_en"
],
"description": "en_to_uk: text typed on EN layout meant for UK; uk_to_en: the reverse (default en_to_uk)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"text"
],
"additionalProperties": false
}🟢wcag_contrast_checker(foreground, background, locale)
Compute the WCAG 2.x contrast ratio between two hex colors and whether it passes AA/AAA for normal and large text. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"foreground": {
"type": "string",
"description": "Text colour as hex, e.g. #767676"
},
"background": {
"type": "string",
"description": "Background colour as hex, e.g. #ffffff"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"foreground",
"background"
],
"additionalProperties": false
}🟢csv_to_json(text, has_header, locale)
Parse CSV/TSV text (auto-detecting tab, semicolon or comma delimiter) with a header row into an array of JSON objects. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "CSV/TSV text to convert"
},
"has_header": {
"type": [
"boolean",
"string"
],
"description": "Treat the first row as column names (default true); if false, columns are named col1, col2, …"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"text"
],
"additionalProperties": false
}🟡csv_to_sql(text, table_name, has_header, batch_size, nulls, ...)
Turn CSV/TSV rows into SQL INSERT statements with standard double-quoted identifiers and escaped values. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "CSV/TSV text to convert"
},
"table_name": {
"type": "string",
"description": "Target table name (default my_table)"
},
"has_header": {
"type": [
"boolean",
"string"
],
"description": "Use the first row as column names (default true); if false, columns are named col1, col2, …"
},
"batch_size": {
"type": [
"number",
"string"
],
"description": "Rows per INSERT statement (default 50)"
},
"nulls": {
"type": [
"boolean",
"string"
],
"description": "Emit NULL for empty cells (default true)"
},
"quote_all": {
"type": [
"boolean",
"string"
],
"description": "Quote every value, even numeric ones (default false)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"text"
],
"additionalProperties": false
}⚪table_to_csv(text, locale)
Convert a pasted HTML <table> or delimited (tab/semicolon/comma) table into clean CSV. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "An HTML <table> or delimited table text"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"text"
],
"additionalProperties": false
}⚪markdown_table(text, locale)
Build a padded GitHub-flavored Markdown table from CSV/TSV text (first row is the header). Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "CSV/TSV rows; the first row is the header"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"text"
],
"additionalProperties": false
}🟢json_formatter(text, action, indent, locale)
Validate and pretty-print or minify JSON, reporting the line and column on a parse error. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "JSON text to format"
},
"action": {
"type": "string",
"enum": [
"pretty",
"minify"
],
"description": "pretty = indented (default); minify = single line"
},
"indent": {
"type": [
"number",
"string"
],
"description": "Spaces per level for pretty (default 2), or \"tab\" for tabs"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"text"
],
"additionalProperties": false
}⚪gitignore_generator(technologies, locale)
Build a .gitignore from curated templates for Node, Python, Go, Rust, macOS, VS Code and more. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"technologies": {
"type": "array",
"items": {
"type": "string"
},
"description": "Stacks to include. Any of: \"Node\", \"Python\", \"Java\", \"Go\", \"Rust\", \"PHP\", \"React / Vite\", \"macOS\", \"Windows\", \"Linux\", \"VS Code\", \"JetBrains\""
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"technologies"
],
"additionalProperties": false
}⚪gradient_generator(type, angle, colors, locale)
Build a CSS linear or radial gradient background declaration from two or more colors. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"type": {
"type": "string",
"enum": [
"linear",
"radial"
],
"description": "Gradient type (default linear)"
},
"angle": {
"type": [
"number",
"string"
],
"description": "Angle in degrees for linear gradients, 0–360 (default 90)"
},
"colors": {
"type": "array",
"items": {
"type": "string"
},
"description": "Color stops, e.g. [\"#1a7f5a\", \"#0d3b66\"] (at least 2)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"colors"
],
"additionalProperties": false
}⚪htaccess_generator(force_https, www, disable_listing, cache, gzip, ...)
Generate Apache .htaccess rules: force HTTPS, www redirect, caching, gzip, hotlink protection and more. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"force_https": {
"type": "boolean",
"description": "Redirect all HTTP to HTTPS (default false)"
},
"www": {
"type": "string",
"enum": [
"none",
"add",
"remove"
],
"description": "www redirect: none / add / remove (default none)"
},
"disable_listing": {
"type": "boolean",
"description": "Disable directory listing (Options -Indexes) (default false)"
},
"cache": {
"type": "boolean",
"description": "Add browser caching headers (default false)"
},
"gzip": {
"type": "boolean",
"description": "Compress text responses with mod_deflate (default false)"
},
"block_hotlink": {
"type": "boolean",
"description": "Block image hotlinking (default false)"
},
"hotlink_domain": {
"type": "string",
"description": "Your domain for hotlink protection, e.g. example.com"
},
"error_404": {
"type": "string",
"description": "Custom 404 page path, e.g. /404.html"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [],
"additionalProperties": false
}⚪meta_tag_generator(title, description, url, site_name, image, ...)
Generate SEO, Open Graph and Twitter Card HTML meta tags for a page. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"title": {
"type": "string",
"description": "Page title"
},
"description": {
"type": "string",
"description": "Meta description"
},
"url": {
"type": "string",
"description": "Canonical / og:url"
},
"site_name": {
"type": "string",
"description": "og:site_name"
},
"image": {
"type": "string",
"description": "og:image / twitter:image URL"
},
"twitter_card": {
"type": "string",
"enum": [
"summary_large_image",
"summary"
],
"description": "Twitter card type (default summary_large_image)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"title"
],
"additionalProperties": false
}⚪random_number_generator(min, max, count, unique, sorted, ...)
Generate cryptographically random integers in a range, optionally unique and sorted. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"min": {
"type": [
"number",
"string"
],
"description": "Lowest value (inclusive)"
},
"max": {
"type": [
"number",
"string"
],
"description": "Highest value (inclusive)"
},
"count": {
"type": [
"number",
"string"
],
"description": "How many numbers to generate (default 1, max 10000)"
},
"unique": {
"type": "boolean",
"description": "No repeats (default false)"
},
"sorted": {
"type": "boolean",
"description": "Sort ascending (default false)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"min",
"max"
],
"additionalProperties": false
}⚪robots_txt_generator(access, disallow, block_ai, crawl_delay, sitemap, ...)
Build a robots.txt: allow or block all, custom disallow paths, AI-crawler blocking, crawl-delay and sitemap. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"access": {
"type": "string",
"enum": [
"allow",
"block",
"custom"
],
"description": "allow all, block all, or custom (default allow)"
},
"disallow": {
"type": "array",
"items": {
"type": "string"
},
"description": "Paths to disallow (used when access=custom)"
},
"block_ai": {
"type": "boolean",
"description": "Also block common AI crawlers (default false)"
},
"crawl_delay": {
"type": [
"number",
"string"
],
"description": "Crawl-delay in seconds (optional)"
},
"sitemap": {
"type": "string",
"description": "Sitemap URL (optional)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [],
"additionalProperties": false
}🟢utm_builder(url, source, medium, campaign, term, ...)
Append encoded UTM campaign parameters to a URL, preserving any existing query and fragment. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"url": {
"type": "string",
"description": "Base URL, e.g. https://example.com/landing"
},
"source": {
"type": "string",
"description": "utm_source, e.g. google"
},
"medium": {
"type": "string",
"description": "utm_medium, e.g. cpc"
},
"campaign": {
"type": "string",
"description": "utm_campaign, e.g. spring_sale"
},
"term": {
"type": "string",
"description": "utm_term (optional)"
},
"content": {
"type": "string",
"description": "utm_content (optional)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [
"url",
"source",
"medium",
"campaign"
],
"additionalProperties": false
}🟢file_hash(text, data, algorithm, locale)
Compute a SHA-1/256/384/512 hex checksum of provided text or base64 bytes. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"text": {
"type": "string",
"description": "UTF-8 text to hash (provide text or data)"
},
"data": {
"type": "string",
"description": "Base64-encoded bytes to hash (provide text or data)"
},
"algorithm": {
"type": "string",
"enum": [
"SHA-1",
"SHA-256",
"SHA-384",
"SHA-512"
],
"description": "Hash algorithm (default SHA-256)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [],
"additionalProperties": false
}⚪password_generator(length, uppercase, lowercase, digits, symbols, ...)
Generate a cryptographically strong random password with configurable length and character sets. Runs on smart-tools.xyz.
Eingabe-Schema
{
"type": "object",
"properties": {
"length": {
"type": [
"number",
"string"
],
"description": "Password length, 1–256 (default 20)"
},
"uppercase": {
"type": "boolean",
"description": "Include A–Z (default true)"
},
"lowercase": {
"type": "boolean",
"description": "Include a–z (default true)"
},
"digits": {
"type": "boolean",
"description": "Include 0–9 (default true)"
},
"symbols": {
"type": "boolean",
"description": "Include !@#… (default true)"
},
"locale": {
"type": "string",
"enum": [
"en",
"de",
"es",
"fr",
"it",
"nl",
"uk"
],
"description": "Language for the source_url link (default en)"
}
},
"required": [],
"additionalProperties": false
}Community
Nachweis
Aktuelle Beobachtungen
verifiziertVersion nicht aufgezeichnet74 Tools
verifiziertVersion nicht aufgezeichnet74 Tools