Gloam
Private stablecoin payments for people and AI agents on mainnet, hosted or local with limits.
Sollte ich dies verwenden
Qualität und Sicherheit
Befunde (1)
- LOWin gloam_connect_full_agent
Basierend auf einer automatisierten Analyse der Tool-Definitionen und der Einhaltung des Protokolls.
Kontextkosten
Dies ist die ungefähre Anzahl der Tokens, die jedes Mal verbraucht werden, wenn die Tools des Servers in den Kontext eines Modells geladen werden. Höhere Werte verringern die Aufmerksamkeit, die für andere Aufgaben verfügbar ist.
Installieren
Installation mit einem Klick
Fügen Sie dies Ihrer Datei `claude_desktop_config.json` hinzu:
{
"mcpServers": {
"gloam": {
"command": "npx",
"args": [
"@gloamtrade/mcp"
]
}
}
}Ausführbare Pakete
0.10.1stdioRemote-Endpunkte
https://www.gloam.trade/mcpstreamable-httpWas es kann
Tool-Inventar
Tools (9)
🟢gloam_info
What Gloam is, what this hosted server can do, and where to go to sign or spend. Call this first. This server only reads and plans: it never holds funds and never takes a private key, recovery phrase or note secret.
Eingabe-Schema
{
"type": "object",
"properties": {}
}🟢gloam_networks(network)
The networks Gloam runs on, mainnets first, with each vault (pool) address, the private swap routers (Robinhood Chain and Tempo mainnet), the assets you can deposit (on mainnet: USDC.e, pathUSD, USDT0 and OUSD on Tempo; USDG, GLOAM, PONS, CASHCAT, ETH, AI and ORBIO on Robinhood Chain; USDC, EURC, USDT and ETH on Base; USDC, USDT, USDG, PYUSD, EURC and ETH on Ethereum; USDC on Elysium, with HYPE and KNTQ once their queued deposit limits land; USDT, USDC (18 decimals each), BNB and BDX on BNB Chain; on testnet: OUSD and PathUSD on Tempo, USDG and ETH on Robinhood Chain, and more on Base Sepolia and Ethereum Sepolia), explorers, RPCs and the testnet faucets.
Eingabe-Schema
{
"type": "object",
"properties": {
"network": {
"type": "string",
"enum": [
"tempo",
"robinhood",
"base",
"ethereum",
"robinhood-mainnet",
"tempo-mainnet",
"base-mainnet",
"ethereum-mainnet",
"elysium-mainnet",
"bnb-mainnet"
],
"description": "Gloam network: \"robinhood-mainnet\" (Robinhood Chain mainnet: USDG, GLOAM, PONS, CASHCAT, ETH, AI and ORBIO), \"tempo-mainnet\" (Tempo mainnet: USDC.e, pathUSD, USDT0, OUSD), \"base-mainnet\" (Base mainnet: USDC, EURC, USDT, ETH), \"ethereum-mainnet\" (Ethereum mainnet: USDC, USDT, USDG, PYUSD, EURC, ETH), \"elysium-mainnet\" (Elysium mainnet: USDC, then HYPE and KNTQ once their queued deposit limits land; gas in HYPE), \"bnb-mainnet\" (BNB Chain mainnet: USDT and USDC with 18 decimals, BNB, and BDX capped at 100,000 per deposit; gas in BNB), or a testnet: \"tempo\" (Tempo Moderato), \"robinhood\" (Robinhood Chain testnet), \"base\" (Base Sepolia) or \"ethereum\" (Ethereum Sepolia). Leave out for every network."
}
}
}🟢gloam_vault_stats(network)
Public totals for each Gloam vault, read from the chain: what it holds, and counts of deposits, private transfers, cash outs and payment messages. Totals only, no wallets. Cached about a minute.
Eingabe-Schema
{
"type": "object",
"properties": {
"network": {
"type": "string",
"enum": [
"tempo",
"robinhood",
"base",
"ethereum",
"robinhood-mainnet",
"tempo-mainnet",
"base-mainnet",
"ethereum-mainnet",
"elysium-mainnet",
"bnb-mainnet"
],
"description": "Gloam network: \"robinhood-mainnet\" (Robinhood Chain mainnet: USDG, GLOAM, PONS, CASHCAT, ETH, AI and ORBIO), \"tempo-mainnet\" (Tempo mainnet: USDC.e, pathUSD, USDT0, OUSD), \"base-mainnet\" (Base mainnet: USDC, EURC, USDT, ETH), \"ethereum-mainnet\" (Ethereum mainnet: USDC, USDT, USDG, PYUSD, EURC, ETH), \"elysium-mainnet\" (Elysium mainnet: USDC, then HYPE and KNTQ once their queued deposit limits land; gas in HYPE), \"bnb-mainnet\" (BNB Chain mainnet: USDT and USDC with 18 decimals, BNB, and BDX capped at 100,000 per deposit; gas in BNB), or a testnet: \"tempo\" (Tempo Moderato), \"robinhood\" (Robinhood Chain testnet), \"base\" (Base Sepolia) or \"ethereum\" (Ethereum Sepolia). Leave out for every network."
}
}
}🟢gloam_create_payment_request(to, network, asset, amount, note, ...)
Make a link that asks someone to pay your Gloam address privately. It opens Pay in the Gloam app with the address, amount, asset and note filled in; the payer checks and sends. The details ride after the # of the link, so the payer's browser never sends them to a server. Needs your public Gloam address (gloamr1.…), never a key.
Eingabe-Schema
{
"type": "object",
"properties": {
"to": {
"type": "string",
"description": "Your Gloam address to be paid at, gloamr1.… (public; find it in the app under Receive)."
},
"network": {
"type": "string",
"enum": [
"tempo",
"robinhood",
"base",
"ethereum",
"robinhood-mainnet",
"tempo-mainnet",
"base-mainnet",
"ethereum-mainnet",
"elysium-mainnet",
"bnb-mainnet"
],
"description": "Gloam network: \"robinhood-mainnet\" (Robinhood Chain mainnet: USDG, GLOAM, PONS, CASHCAT, ETH, AI and ORBIO), \"tempo-mainnet\" (Tempo mainnet: USDC.e, pathUSD, USDT0, OUSD), \"base-mainnet\" (Base mainnet: USDC, EURC, USDT, ETH), \"ethereum-mainnet\" (Ethereum mainnet: USDC, USDT, USDG, PYUSD, EURC, ETH), \"elysium-mainnet\" (Elysium mainnet: USDC, then HYPE and KNTQ once their queued deposit limits land; gas in HYPE), \"bnb-mainnet\" (BNB Chain mainnet: USDT and USDC with 18 decimals, BNB, and BDX capped at 100,000 per deposit; gas in BNB), or a testnet: \"tempo\" (Tempo Moderato), \"robinhood\" (Robinhood Chain testnet), \"base\" (Base Sepolia) or \"ethereum\" (Ethereum Sepolia).",
"default": "robinhood"
},
"asset": {
"type": "string",
"description": "Token symbol or address, e.g. USDG on Robinhood Chain, OUSD or PathUSD on Tempo. Default: the network's main stablecoin."
},
"amount": {
"type": "string",
"description": "Amount in whole units, e.g. \"12.50\". Leave out to let the payer choose."
},
"note": {
"type": "string",
"description": "A reference the payer sees, e.g. \"Invoice 042\" (up to 80 characters)."
},
"name": {
"type": "string",
"description": "Your name as the payer should see it (up to 40 characters)."
}
},
"required": [
"to"
]
}🟢gloam_verify_proof(proof)
Check a Gloam proof someone shared with you: proof of funds (gloamfunds1:), proof of payment (gloampay1:), payroll total (gloamroll1:) or exact balance (gloambal1:). Runs the same checks as gloam.trade/verify on the server: the zero-knowledge proof, that it was made on Gloam's vault, who it is for, expiry, and the live vault state. The result names the network: `network.testnet` true means the proof was made with test funds, not on mainnet. A proof of payment shows a private payment was made, not who paid whom; a payroll total shows a run of payments the prover funded, not who was paid. The older gloamdisc1 balance disclosure is never verified: anyone can copy one from a public deposit. Proofs are meant to be shared; they hold no secrets.
Eingabe-Schema
{
"type": "object",
"properties": {
"proof": {
"type": "string",
"description": "The full proof text, starting gloamfunds1:, gloampay1:, gloamroll1:, gloambal1: or gloamdisc1:."
}
},
"required": [
"proof"
]
}🟢gloam_plan_deposit(network, asset, amount)
Plan a deposit into a private Gloam balance (a shield): the steps, what becomes public and what stays private, and the app link to do it. Does not sign or send anything; you sign in your own wallet in the app.
Eingabe-Schema
{
"type": "object",
"properties": {
"network": {
"type": "string",
"enum": [
"tempo",
"robinhood",
"base",
"ethereum",
"robinhood-mainnet",
"tempo-mainnet",
"base-mainnet",
"ethereum-mainnet",
"elysium-mainnet",
"bnb-mainnet"
],
"description": "Gloam network: \"robinhood-mainnet\" (Robinhood Chain mainnet: USDG, GLOAM, PONS, CASHCAT, ETH, AI and ORBIO), \"tempo-mainnet\" (Tempo mainnet: USDC.e, pathUSD, USDT0, OUSD), \"base-mainnet\" (Base mainnet: USDC, EURC, USDT, ETH), \"ethereum-mainnet\" (Ethereum mainnet: USDC, USDT, USDG, PYUSD, EURC, ETH), \"elysium-mainnet\" (Elysium mainnet: USDC, then HYPE and KNTQ once their queued deposit limits land; gas in HYPE), \"bnb-mainnet\" (BNB Chain mainnet: USDT and USDC with 18 decimals, BNB, and BDX capped at 100,000 per deposit; gas in BNB), or a testnet: \"tempo\" (Tempo Moderato), \"robinhood\" (Robinhood Chain testnet), \"base\" (Base Sepolia) or \"ethereum\" (Ethereum Sepolia).",
"default": "tempo"
},
"asset": {
"type": "string",
"description": "Token symbol or address. Default: the network's main stablecoin (OUSD on Tempo, USDG on Robinhood Chain)."
},
"amount": {
"type": "string",
"description": "Amount in whole units, e.g. \"25\"."
}
}
}🟢gloam_mpp_how_to(role, network)
How to pay or charge privately over MPP (the Machine Payments Protocol, HTTP 402) with the gloam method from @gloamtrade/mppx-gloam, with code. A charge settles as a private transfer in a Gloam vault: the chain sees no amount, asset, payer or payee.
Eingabe-Schema
{
"type": "object",
"properties": {
"role": {
"type": "string",
"enum": [
"pay",
"charge",
"both"
],
"default": "both",
"description": "\"charge\" to get paid for an API or tool, \"pay\" for an agent or app paying one, \"both\" for both."
},
"network": {
"type": "string",
"enum": [
"tempo",
"robinhood",
"base",
"ethereum",
"robinhood-mainnet",
"tempo-mainnet",
"base-mainnet",
"ethereum-mainnet",
"elysium-mainnet",
"bnb-mainnet"
],
"description": "Gloam network: \"robinhood-mainnet\" (Robinhood Chain mainnet: USDG, GLOAM, PONS, CASHCAT, ETH, AI and ORBIO), \"tempo-mainnet\" (Tempo mainnet: USDC.e, pathUSD, USDT0, OUSD), \"base-mainnet\" (Base mainnet: USDC, EURC, USDT, ETH), \"ethereum-mainnet\" (Ethereum mainnet: USDC, USDT, USDG, PYUSD, EURC, ETH), \"elysium-mainnet\" (Elysium mainnet: USDC, then HYPE and KNTQ once their queued deposit limits land; gas in HYPE), \"bnb-mainnet\" (BNB Chain mainnet: USDT and USDC with 18 decimals, BNB, and BDX capped at 100,000 per deposit; gas in BNB), or a testnet: \"tempo\" (Tempo Moderato), \"robinhood\" (Robinhood Chain testnet), \"base\" (Base Sepolia) or \"ethereum\" (Ethereum Sepolia).",
"default": "tempo"
}
}
}🟢gloam_swap_quote(network, from, to, amount)
Quote a private swap from a private Gloam balance: what you would get, the route, the vault's fee, and the first thing that would stop the swap (too thin a pool, a refund the vault could not take back, the relay's floor where gas is dear), or none. Read only: it never builds or sends a swap. A private swap hides who swapped; the tokens and amounts are public. To swap, use the Gloam app or the local server (npx -y @gloamtrade/mcp, gloam_execute_private_swap).
Eingabe-Schema
{
"type": "object",
"properties": {
"network": {
"type": "string",
"enum": [
"tempo",
"robinhood",
"base",
"ethereum",
"robinhood-mainnet",
"tempo-mainnet",
"base-mainnet",
"ethereum-mainnet",
"elysium-mainnet",
"bnb-mainnet"
],
"description": "Gloam network: \"robinhood-mainnet\" (Robinhood Chain mainnet: USDG, GLOAM, PONS, CASHCAT, ETH, AI and ORBIO), \"tempo-mainnet\" (Tempo mainnet: USDC.e, pathUSD, USDT0, OUSD), \"base-mainnet\" (Base mainnet: USDC, EURC, USDT, ETH), \"ethereum-mainnet\" (Ethereum mainnet: USDC, USDT, USDG, PYUSD, EURC, ETH), \"elysium-mainnet\" (Elysium mainnet: USDC, then HYPE and KNTQ once their queued deposit limits land; gas in HYPE), \"bnb-mainnet\" (BNB Chain mainnet: USDT and USDC with 18 decimals, BNB, and BDX capped at 100,000 per deposit; gas in BNB), or a testnet: \"tempo\" (Tempo Moderato), \"robinhood\" (Robinhood Chain testnet), \"base\" (Base Sepolia) or \"ethereum\" (Ethereum Sepolia).",
"default": "robinhood-mainnet"
},
"from": {
"type": "string",
"description": "The asset you pay with: a symbol (USDG, ETH, USDC.e) or a token address."
},
"to": {
"type": "string",
"description": "The asset you receive: a symbol or a token address."
},
"amount": {
"type": "string",
"description": "How much of `from` to swap, in whole units, e.g. \"100\" or \"0.05\"."
}
},
"required": [
"from",
"to",
"amount"
]
}🟢gloam_connect_full_agent(client)
Commands to install the local Gloam MCP server, which can sign and pay (shield, private pay, x402 and MPP, spending limits) with keys kept on your machine: Claude Code, Codex, Cursor, VS Code, Claude Desktop and any MCP client, plus the plugin marketplace gloamtrade/gloam-plugins.
Eingabe-Schema
{
"type": "object",
"properties": {
"client": {
"type": "string",
"enum": [
"claude-code",
"codex",
"cursor",
"vscode",
"claude-desktop",
"gemini",
"all"
],
"default": "all",
"description": "Which app to show commands for."
}
}
}Community
Nachweis