Swatch Ledger
Fabric shrinkage from a swatch wash test, and how much fabric to buy before washing.
Sollte ich dies verwenden
Qualität und Sicherheit
Befunde (1)
- LOWTool 'plan_fabric_length' description lacks action verbin plan_fabric_length
Basierend auf einer automatisierten Analyse der Tool-Definitionen und der Einhaltung des Protokolls.
Kontextkosten
Dies ist die ungefähre Anzahl der Tokens, die jedes Mal verbraucht werden, wenn die Tools des Servers in den Kontext eines Modells geladen werden. Höhere Werte verringern die Aufmerksamkeit, die für andere Aufgaben verfügbar ist.
Installieren
Installation mit einem Klick
Fügen Sie dies Ihrer Datei `claude_desktop_config.json` hinzu:
{
"mcpServers": {
"swatch-ledger-mcp": {
"url": "https://swatch-ledger.pages.dev/mcp"
}
}
}Remote-Endpunkte
https://swatch-ledger.pages.dev/mcpstreamable-httpWas es kann
Tool-Inventar
Tools (2)
🟢measure_fabric_shrinkage(length_before, length_after, width_before, width_after, unit)
Calculates fabric shrinkage (or growth) from a swatch measured before and after washing and drying: length change along the selvedge, width change across the fabric, and the change in area. Use the same marked distances before and after, in one unit (cm or inches). Positive percentages are shrinkage, negative are growth.
Eingabe-Schema
{
"type": "object",
"properties": {
"length_before": {
"type": "number",
"description": "Marked length before washing (along the selvedge), greater than 0.",
"exclusiveMinimum": 0
},
"length_after": {
"type": "number",
"description": "The same marked length after washing and drying.",
"exclusiveMinimum": 0
},
"width_before": {
"type": "number",
"description": "Marked width before washing (across the fabric), greater than 0.",
"exclusiveMinimum": 0
},
"width_after": {
"type": "number",
"description": "The same marked width after washing and drying.",
"exclusiveMinimum": 0
},
"unit": {
"type": "string",
"enum": [
"cm",
"in"
],
"description": "Unit of the four measurements (only used to label the answer). Default cm."
}
},
"required": [
"length_before",
"length_after",
"width_before",
"width_after"
],
"additionalProperties": false
}🟢plan_fabric_length(usable_length, shrinkage_percent, extra_length, shop_increment, unit)
Works out how much fabric to buy before washing so that the usable length needed remains afterwards: required length = (usable length + extra) ÷ (1 − lengthwise shrinkage), then rounded up to the shop’s selling increment. Works in metres or yards (any one unit). A negative shrinkage rate means growth.
Eingabe-Schema
{
"type": "object",
"properties": {
"usable_length": {
"type": "number",
"description": "Length needed after washing (check the pattern layout), greater than 0.",
"exclusiveMinimum": 0
},
"shrinkage_percent": {
"type": "number",
"minimum": -100,
"exclusiveMaximum": 100,
"description": "Measured lengthwise shrinkage in percent, e.g. 5 for 5%. Negative means growth."
},
"extra_length": {
"type": "number",
"minimum": 0,
"description": "Optional extra usable length after washing (default 0). Do not count an allowance the pattern already includes."
},
"shop_increment": {
"type": "number",
"minimum": 0,
"description": "The shop’s selling increment to round up to, e.g. 0.25 for quarter metres or 0.125 for eighth yards. 0 for no rounding (default 0)."
},
"unit": {
"type": "string",
"enum": [
"m",
"yd"
],
"description": "Unit of the lengths (only used to label the answer). Default m."
}
},
"required": [
"usable_length",
"shrinkage_percent"
],
"additionalProperties": false
}Community
Nachweis