bobai

Brain Plaza — find AI agents on BNB Smart Chain that can do a given thing. Searches every ERC-8004 agent that actually answers when contacted, matched against the tools each one returned when asked and the description it wrote on-chain. Not self-reported categories, not a curated list. Use this before assuming no agent exists for a task.

{
  "type": "object",
  "properties": {
    "query": {
      "type": "string",
      "description": "What you need done, in plain words — e.g. \"swap routing\", \"stablecoin payments\", \"pool depth\""
    },
    "speaks": {
      "type": "string",
      "description": "Optional: require a protocol. One or more of mcp, a2a, x402 (comma-separated)."
    }
  },
  "required": [
    "query"
  ],
  "additionalProperties": false
}

Brain Plaza — the measured state of the ERC-8004 agent registry on BNB Smart Chain: how many agents are registered, how many registrations are even readable, how many name an endpoint, how many answer, and how many independent operators run them. Every id read, nothing extrapolated.

{
  "type": "object",
  "properties": {},
  "additionalProperties": false
}

Who has actually been hired and paid on BNB Smart Chain. Reads the ERC-8183 job escrow kernel: jobs created, jobs funded, deliverables submitted, and escrow actually released — per provider. A registration is self-reported; a funded job is somebody else's money. Pass an address to get one provider's balance, or nothing for the whole kernel.

{
  "type": "object",
  "properties": {
    "address": {
      "type": "string",
      "description": "Optional provider address (0x…). Omit for the whole-kernel summary."
    }
  },
  "additionalProperties": false
}

Measure what a trade on BNB Smart Chain would actually cost, for ANY token or pool — before placing it. Reads the pool live from the chain and returns: real cost per trade size (price impact + swap fee + transfer tax together, not the headline slippage a router shows), the USD size that moves the price 1% in each direction, the transfer tax MEASURED from executed trades rather than taken from a label, how much of the token's liquidity the readable pool actually holds, and whether the LP is burned or still withdrawable — plus our own sell simulation on the router from a fresh address (sellability). A token still raising on four.meme with no pool yet is measured from four.meme's own contract instead (curve: raise progress, price, buy/sell cost per size, fee). Works on PancakeSwap V2/V3, Uniswap V2 and Biswap. Read tax.measured and tax.source before using the cost columns: a tax that could not be measured comes back null with a warning, never as 0%; quotable: false with a reason is an answer, not an error. Also returned: deeperPoolElsewhere (a bigger pool for the same token than the one read), tax.simulated (an independent cross-check next to the measured tax), lp.custody (who holds the LP of a V2 pair, wallet by wallet, the deployer flagged; complete from the pair's own logs when it is under an hour old; V3 positions not read), holders (the largest wallets with exchange, lock and burn addresses named apart, or unknown: true with the reason when there is no real list yet), age (pool and token, from the first block their code existed), activity (swaps, buys vs sells, unique traders, volume and the largest sell over the window read), flow (who sold over that window: the deployer and wallets it funded, netted against liquidity they added back to the same pair, top holders selling over a quarter of their balance, and for a pool under an hour old the launch-block buyers still holding), venues[] (the scanned pool first, pools under $100 left out) and contract.properties (the GoPlus contract flags, true/false/null, with the ones it did not check named). No API key; pool figures are never cached, contract properties (from GoPlus) for up to 6 h.

{
  "type": "object",
  "properties": {
    "address": {
      "type": "string",
      "description": "A BSC token address, a pool/pair address, or any BscScan / DexScreener / PancakeSwap link containing one"
    }
  },
  "required": [
    "address"
  ],
  "additionalProperties": false
}

For an agent about to trade ANY token on BNB Smart Chain: the check to run before every trade, in one call and at YOUR size. Answers the two questions that matter before signing - can I get in, and can I get out again - and what the trip costs. Returns stop[] (facts that end an automated trade: the sell does not go through from a fresh address, nothing quotes, half the money is gone on an immediate round trip) and caution[] (facts to weigh, each with its figure and the line it was measured against: a transfer tax that is high, unknown or changeable by the owner; a size that moves the price more than 1%; a deeper pool elsewhere; LP that can still be withdrawn, and by whom - the deployer holding the LP is named - or that was already withdrawn; holders unknown or concentrated; the deployer or a wallet it funded selling into the pool (net of liquidity it added back), a top holder selling over a quarter of its balance, launch buyers holding over 10%; contract flags), then the figures: the best PancakeSwap route at this size, what you pay and receive, the slippage in bps this size really needs (a fee-on-transfer token reverts below about 1500), the round trip with the transfer tax MEASURED from executed trades applied, the 1% depth in both directions, LP burned and who holds the rest, pool and token age, the swaps of the last hour and who sold in it (flow). About 3.5 KB - built from bsc_pool_scan and pancakeswap_best_route, which stay available under details for every figure behind it. A token still on its four.meme launch curve is answered from four.meme's own contract. It does not say "safe" and returns no score: it cannot see an owner who has not acted yet, and says so. No API key, nothing cached.

{
  "type": "object",
  "properties": {
    "address": {
      "type": "string",
      "description": "A BSC token address, a pool/pair address, or a link containing one"
    },
    "usd": {
      "type": "number",
      "description": "Trade size in dollars, optional - defaults to 250"
    }
  },
  "required": [
    "address"
  ],
  "additionalProperties": false
}

For a liquidity provider deciding WHERE to put liquidity on PancakeSwap. A pair lives in up to five pools at once — V2 at 0.25% and V3 at 0.01%, 0.05%, 0.25% and 1.00% — and every source ranks them by the money already parked in them, which does not say which one pays. This measures each tier over a live window: swaps, turnover, the fees the pool actually paid out, and those fees per $1,000 of capital — over TWO denominators. The first is everything the pool holds, which is what every interface shows. The second is the capital standing within 2% of the current price, reconstructed by walking the tick book of the pool itself, because concentrated liquidity parked far from the price earns nothing and a new dollar only competes with the capital that is at the price. The two rankings disagree often, and both are returned. It also names tiers holding real money that did not trade at all. Measured, never annualised: the window is about an hour of chain and is reported with the answer.

{
  "type": "object",
  "properties": {
    "address": {
      "type": "string",
      "description": "A BSC token address, or a PancakeSwap pool address to pin the pair"
    }
  },
  "required": [
    "address"
  ],
  "additionalProperties": false
}

For a liquidity provider who has picked a PancakeSwap V3 pool and now has to pick a PRICE RANGE - the decision concentrated liquidity actually forces, and the one every interface answers with a preset. This does not model and does not forecast. It replays: the V3 Swap event carries the liquidity that was active when each trade went through, so a position of a stated size is walked through the swaps that really happened in a live window and asked, at each one, whether it was in range and what share of the active liquidity it was. Returns per candidate width the fees it would have collected, how much of the window it stayed in range, and how many times the price walked out. Impermanent loss is not in it, and it is worst exactly where the fees are best. The window is about an hour and travels with the answer.

{
  "type": "object",
  "properties": {
    "address": {
      "type": "string",
      "description": "A BSC token address, or a PancakeSwap V3 pool address to pin the pool"
    },
    "capitalUsd": {
      "type": "number",
      "description": "Size of the position in dollars, optional - defaults to 1000"
    },
    "quote": {
      "type": "string",
      "description": "The other side of the pair, optional: BNB, USDT, USDC, USD1 or BUSD, or its address. Without it the quote with the deepest V3 pool is used, so pass it whenever a pair was named (CAKE/BNB)"
    }
  },
  "required": [
    "address"
  ],
  "additionalProperties": false
}

For an agent about to swap on PancakeSwap, and for the two questions it has to answer before signing. FIRST: which of the up-to-five pools the pair lives in actually returns the most AT THIS SIZE, quoted by the venue itself rather than ranked by depth - the deepest pool is regularly not the cheapest one for the trade being made. SECOND: what comes back if the proceeds are sold straight back on the same route, with the transfer tax measured from executed trades applied to the amounts carried between the legs, because the tax is taken outside the pool where no quoter can see it. Returns the best route, what every other route would have cost, the round trip with and without the tax, and the slippage this size really needs. It is not a safety certificate and does not use the word: it cannot see an owner who has not acted yet, and it says so.

{
  "type": "object",
  "properties": {
    "address": {
      "type": "string",
      "description": "A BSC token address, or a PancakeSwap pool address to pin the pair"
    },
    "usd": {
      "type": "number",
      "description": "Trade size in dollars, optional - defaults to 250"
    }
  },
  "required": [
    "address"
  ],
  "additionalProperties": false
}

$BOBAI (Brain On BNB AI) on-chain token info: contract, name, symbol, decimals, total & circulating supply, amount burned. BEP-20 on BNB Chain, verified & renounced.

{
  "type": "object",
  "properties": {},
  "additionalProperties": false
}

Total $BOBAI permanently burned (sent to the dead/zero address by the autonomous 24/7 buyback-and-burn bot).

{
  "type": "object",
  "properties": {},
  "additionalProperties": false
}

Current circulating $BOBAI supply (total supply minus burned tokens).

{
  "type": "object",
  "properties": {},
  "additionalProperties": false
}

BNB and $BOBAI balance of any BSC wallet address.

{
  "type": "object",
  "properties": {
    "address": {
      "type": "string",
      "description": "BSC wallet address (0x + 40 hex chars)"
    }
  },
  "required": [
    "address"
  ],
  "additionalProperties": false
}

Official $BOBAI links: website, BscScan contract + verified source, X, Telegram, DexScreener, GeckoTerminal, CoinGecko, live burn audit log, llms.txt.

{
  "type": "object",
  "properties": {},
  "additionalProperties": false
}

The DEX parameters a $BOBAI trade needs, read from the chain: PancakeSwap V2 router, pair, both swap paths, and the fee-on-transfer settings (3% tax, minimum 15% slippage, the SupportingFeeOnTransferTokens method names). Reports the numbers; a naive swap reverts without them.

{
  "type": "object",
  "properties": {},
  "additionalProperties": false
}

START HERE. Interactive guide for an agent that just discovered $BOBAI: what you can ask, what you can do, and which tool to call for each — plus the must-know fee-on-transfer rule.

{
  "type": "object",
  "properties": {},
  "additionalProperties": false
}

Ready-to-run viem code for a $BOBAI purchase with BNB on PancakeSwap V2. Reports a live on-chain quote, the 15% slippage floor and the fee-on-transfer method name, so an agent has everything it needs zero-shot. Returns text; this tool holds no key and moves nothing.

{
  "type": "object",
  "properties": {},
  "additionalProperties": false
}

Neutral, verifiable value-accrual mechanics of $BOBAI: the deflationary tax->buyback->burn design + trust properties (renounced, LP burned, fair launch). Describes how the token works, NOT a buy recommendation.

{
  "type": "object",
  "properties": {},
  "additionalProperties": false
}

Live $BOBAI price in USD and BNB + market cap, computed fully on-chain (PancakeSwap V2 pair reserves × Chainlink BNB/USD feed) — no off-chain price API to trust.

{
  "type": "object",
  "properties": {},
  "additionalProperties": false
}

Live $BOBAI liquidity depth: pool reserves, liquidity in USD, LP-burned percentage (perma-locked), and price-impact estimates for common buy sizes (0.1–5 BNB).

{
  "type": "object",
  "properties": {},
  "additionalProperties": false
}

Proof the buyback-and-burn flywheel is actually running: last burn (with BscScan tx), burns over the last 7/30 days, total bot runs — from the public audit log, every entry verifiable on-chain.

{
  "type": "object",
  "properties": {},
  "additionalProperties": false
}

On-chain reward an agent can EARN: every $BOBAI buy >= $100 (single swap) auto-mints a capped-supply collectible NFT to the buyer wallet — no claim, no signup. Live remaining supply per buy-tier and rarity, plus the exact steps to earn one.

{
  "type": "object",
  "properties": {},
  "additionalProperties": false
}

Live smart-money signals for $BOBAI: the tax reserve charging the next buyback (wallet + contract queue = pending buy pressure), whale flows & holdings (auto-tracked 1%-of-supply wallets: 24h/7d in/outflows, top movers with tx, daily balance snapshots with 1d/7d/30d holdings trends), an immutable on-chain ledger of recent $100+ buys (size, buyer wallet, tx), and burn momentum. All verifiable, no API key.

{
  "type": "object",
  "properties": {},
  "additionalProperties": false
}