Future Micro Mold Lab
Scientific-molding calculators: viscosity curve, gate seal, cavity balance, Cpk and gage R&R.
使うべきか
品質と安全性
検出事項(1)
- LOWget_study_protocol 内
ツール定義とプロトコルへの準拠に関する自動分析に基づいています。
コンテキストコスト
これは、サーバーのツールがモデルのコンテキストに読み込まれるたびに消費されるおおよそのトークン数です。数が多いほど、ほかのタスクに使える注意が減ります。
インストール
ワンクリックインストール
これを `claude_desktop_config.json` ファイルに追加してください:
{
"mcpServers": {
"lab": {
"url": "https://www.futuremicromoldllc.com/api/mcp"
}
}
}リモートエンドポイント
https://www.futuremicromoldllc.com/api/mcpstreamable-httpできること
ツール一覧
ツール(11)
🟢viscosity_curve(points, intensificationRatio, machineMaxPressure, context, study_code)
Find the optimal injection velocity from a velocity / peak-pressure sweep. Computes relative viscosity (plastic pressure times fill time) against relative shear rate, locates the shear-thinning plateau, and picks a velocity from the middle of it. Record a fill time on every point for a result that transfers between machines. This is the first study in the sequence; every later study holds its velocity constant.
入力スキーマ
{
"type": "object",
"properties": {
"points": {
"minItems": 2,
"maxItems": 100,
"type": "array",
"items": {
"type": "object",
"properties": {
"velocity": {
"type": "number",
"description": "Injection velocity, in/s"
},
"pressure": {
"type": "number",
"description": "Peak injection pressure as read on the machine, psi"
},
"fillTime": {
"description": "Seconds to fill, first stage only",
"type": "number"
}
},
"required": [
"velocity",
"pressure"
]
}
},
"intensificationRatio": {
"description": "Hydraulic-to-plastic multiplier; omit if pressure is already plastic",
"type": "number"
},
"machineMaxPressure": {
"description": "Machine maximum injection pressure, same units as pressure",
"type": "number"
},
"context": {
"type": "object",
"properties": {
"material": {
"type": "string",
"maxLength": 64
},
"meltTempC": {
"type": "number"
},
"moldTempC": {
"type": "number"
}
}
},
"study_code": {
"description": "A study as the Lab card encodes it; use instead of the measurements (points, intensificationRatio, machineMaxPressure)",
"type": "string",
"minLength": 1,
"maxLength": 8000
}
},
"$schema": "https://json-schema.org/draft/2020-12/schema"
}🟢cavity_balance(levels, context, study_code)
Quantify cavity-to-cavity fill imbalance from short-shot weights. Give two or more replicate shots at a fill level and the result also says whether the variation comes from the cavities (runner and gate geometry) or from shot-to-shot process drift — the two have opposite fixes. Judge balance on a short shot at 90% fill or above.
入力スキーマ
{
"type": "object",
"properties": {
"levels": {
"minItems": 1,
"maxItems": 100,
"type": "array",
"items": {
"type": "object",
"properties": {
"fillPct": {
"type": "number",
"description": "Short-shot fill percentage, e.g. 95"
},
"shots": {
"minItems": 1,
"maxItems": 100,
"type": "array",
"items": {
"type": "object",
"propertyNames": {
"type": "string",
"minLength": 1,
"maxLength": 8
},
"additionalProperties": {
"type": "number"
}
},
"description": "One entry per shot, mapping cavity name to part weight in grams"
}
},
"required": [
"fillPct",
"shots"
]
},
"description": "One entry per fill percentage tested — e.g. a 50%, then a 95%, short shot."
},
"context": {
"type": "object",
"properties": {
"material": {
"type": "string",
"maxLength": 64
},
"meltTempC": {
"type": "number"
},
"moldTempC": {
"type": "number"
}
}
},
"study_code": {
"description": "A study as the Lab card encodes it; use instead of the measurements (levels)",
"type": "string",
"minLength": 1,
"maxLength": 8000
}
},
"$schema": "https://json-schema.org/draft/2020-12/schema"
}🟢pressure_drop(stages, machineMaxPressure, intensificationRatio, context, study_code)
Find where injection pressure is consumed along the flow path. Each reading is the CUMULATIVE peak pressure needed to fill through that section — an air shot gives the nozzle figure, then sprue, runner, gate and the full part — so the values ascend. Known sections: Nozzle, Sprue, Runner, Gate, Part. Run every reading at the velocity the viscosity curve selected.
入力スキーマ
{
"type": "object",
"properties": {
"stages": {
"minItems": 2,
"maxItems": 100,
"type": "array",
"items": {
"type": "object",
"properties": {
"stage": {
"type": "string",
"maxLength": 24,
"description": "Section name, e.g. one of: Nozzle, Sprue, Runner, Gate, Part"
},
"pressure": {
"type": "number",
"description": "Cumulative peak pressure to fill through this section, psi"
}
},
"required": [
"stage",
"pressure"
]
}
},
"machineMaxPressure": {
"description": "Machine maximum injection pressure, same units as pressure",
"type": "number"
},
"intensificationRatio": {
"description": "Hydraulic-to-plastic multiplier; omit if pressure is already plastic",
"type": "number"
},
"context": {
"type": "object",
"properties": {
"material": {
"type": "string",
"maxLength": 64
},
"meltTempC": {
"type": "number"
},
"moldTempC": {
"type": "number"
}
}
},
"study_code": {
"description": "A study as the Lab card encodes it; use instead of the measurements (stages, machineMaxPressure, intensificationRatio)",
"type": "string",
"minLength": 1,
"maxLength": 8000
}
},
"$schema": "https://json-schema.org/draft/2020-12/schema"
}🟢cosmetic_window(xAxis, yAxis, points, context, study_code)
Map which combinations of two process parameters produce a cosmetically acceptable part, and how much room surrounds the centre. Sweep wider than you expect the window to be: a passing point on the edge of the range tested means the window was never closed on that side. Axes and their units: hold_pressure (psi), melt_temp (°C), mold_temp (°C), injection_velocity (in/s), hold_time (s), cooling_time (s). Defects: short, flash, sink, burn, splay, weld-line, drag, warp.
入力スキーマ
{
"type": "object",
"properties": {
"xAxis": {
"type": "string",
"enum": [
"hold_pressure",
"melt_temp",
"mold_temp",
"injection_velocity",
"hold_time",
"cooling_time"
],
"description": "Horizontal parameter. Units by axis: hold_pressure (psi), melt_temp (°C), mold_temp (°C), injection_velocity (in/s), hold_time (s), cooling_time (s)."
},
"yAxis": {
"type": "string",
"enum": [
"hold_pressure",
"melt_temp",
"mold_temp",
"injection_velocity",
"hold_time",
"cooling_time"
],
"description": "Vertical parameter. Units by axis: hold_pressure (psi), melt_temp (°C), mold_temp (°C), injection_velocity (in/s), hold_time (s), cooling_time (s)."
},
"points": {
"minItems": 2,
"maxItems": 100,
"type": "array",
"items": {
"type": "object",
"properties": {
"x": {
"type": "number",
"description": "Value on the x axis, in the unit of whichever axis xAxis selects"
},
"y": {
"type": "number",
"description": "Value on the y axis, in the unit of whichever axis yAxis selects"
},
"pass": {
"type": "boolean",
"description": "Did the part meet the cosmetic criteria?"
},
"defect": {
"type": "string",
"enum": [
"short",
"flash",
"sink",
"burn",
"splay",
"weld-line",
"drag",
"warp"
]
}
},
"required": [
"x",
"y",
"pass"
]
}
},
"context": {
"type": "object",
"properties": {
"material": {
"type": "string",
"maxLength": 64
},
"meltTempC": {
"type": "number"
},
"moldTempC": {
"type": "number"
}
}
},
"study_code": {
"description": "A study as the Lab card encodes it; use instead of the measurements (xAxis, yAxis, points)",
"type": "string",
"minLength": 1,
"maxLength": 8000
}
},
"$schema": "https://json-schema.org/draft/2020-12/schema"
}🟢gate_seal(points, context, study_code)
Find the hold time at which the gate freezes and part weight stops rising. Seal is the first of three consecutive weights within 0.1% of each other; the recommended production hold time adds a margin of one increment. A weight that falls back after seal means the gate did not stay frozen. Run at the velocity the viscosity curve selected.
入力スキーマ
{
"type": "object",
"properties": {
"points": {
"minItems": 2,
"maxItems": 100,
"type": "array",
"items": {
"type": "object",
"properties": {
"holdTime": {
"type": "number",
"description": "Hold time, seconds"
},
"partWeight": {
"type": "number",
"description": "Average part weight, grams"
},
"cushionPosition": {
"description": "Cushion, mm",
"type": "number"
},
"keyDimension": {
"description": "A key dimension measured on the same parts, mm or inches — use whichever the drawing calls out, consistently across all points",
"type": "number"
}
},
"required": [
"holdTime",
"partWeight"
]
}
},
"context": {
"type": "object",
"properties": {
"material": {
"type": "string",
"maxLength": 64
},
"meltTempC": {
"type": "number"
},
"moldTempC": {
"type": "number"
}
}
},
"study_code": {
"description": "A study as the Lab card encodes it; use instead of the measurements (points)",
"type": "string",
"minLength": 1,
"maxLength": 8000
}
},
"$schema": "https://json-schema.org/draft/2020-12/schema"
}🟢cooling_time(points, dimensionName, dimensionTolerance, context, study_code)
Find the shortest cooling time at which a dimension has stopped changing, and the cycle seconds that come off. Supply the drawing tolerance and the rule tightens to a tenth of it. Measure each part at a consistent interval after ejection — the part keeps moving.
入力スキーマ
{
"type": "object",
"properties": {
"points": {
"minItems": 2,
"maxItems": 100,
"type": "array",
"items": {
"type": "object",
"properties": {
"coolingTime": {
"type": "number",
"description": "Cooling time, seconds"
},
"dimension": {
"type": "number",
"description": "Measured dimension, consistent units"
}
},
"required": [
"coolingTime",
"dimension"
]
}
},
"dimensionName": {
"type": "string",
"maxLength": 48
},
"dimensionTolerance": {
"description": "Total drawing tolerance, same units as dimension",
"type": "number"
},
"context": {
"type": "object",
"properties": {
"material": {
"type": "string",
"maxLength": 64
},
"meltTempC": {
"type": "number"
},
"moldTempC": {
"type": "number"
}
}
},
"study_code": {
"description": "A study as the Lab card encodes it; use instead of the measurements (points, dimensionName, dimensionTolerance)",
"type": "string",
"minLength": 1,
"maxLength": 8000
}
},
"$schema": "https://json-schema.org/draft/2020-12/schema"
}🟢process_capability(samples, usl, lsl, target, subgroupSize, ...)
Judge whether a running process can hold a dimension inside its tolerance. Reports Cp and Cpk from within-subgroup sigma and Pp and Ppk from overall sigma — the second pair is what a customer's SPC package computes from the same measurements — each with a 95% confidence interval, an upper bound on parts per million out of spec, and an Anderson–Darling normality check. Estimators follow Minitab's defaults. No verdict is given when the data cannot support one (no limit, zero spread, badly non-normal data). One specification limit is enough. Sample at least 25 consecutive parts without adjusting the process.
入力スキーマ
{
"type": "object",
"properties": {
"samples": {
"minItems": 2,
"maxItems": 100,
"type": "array",
"items": {
"type": "number"
},
"description": "Measurements in production order"
},
"usl": {
"description": "Upper specification limit",
"type": "number"
},
"lsl": {
"description": "Lower specification limit",
"type": "number"
},
"target": {
"description": "Nominal from the drawing. Used only to sanity-check it against usl/lsl (a warning when it falls outside them) — not carried into the share link, since the snapshot has no field for it.",
"type": "number"
},
"subgroupSize": {
"description": "Consecutive measurements per rational subgroup. Omit or 1 for individuals (within sigma from the moving range).",
"type": "integer",
"minimum": 1,
"maximum": 100
},
"withinMethod": {
"description": "Within-sigma estimator when subgroupSize > 1: pooled standard deviation (default, as Minitab) or R-bar/d2.",
"type": "string",
"enum": [
"pooled",
"rbar"
]
},
"study_code": {
"description": "A study as the Lab card encodes it; use instead of the measurements (samples, usl, lsl, target, subgroupSize, withinMethod)",
"type": "string",
"minLength": 1,
"maxLength": 8000
}
},
"$schema": "https://json-schema.org/draft/2020-12/schema"
}🟢gage_rr(operators, tolerance, context, study_code)
Rate a measurement system from a crossed study: every operator measures every part, the same number of times. Two-way ANOVA per the AIAG Measurement Systems Analysis manual (4th ed.), matching Minitab's crossed gage R&R defaults: the operator × part interaction is pooled into repeatability when not significant (α = 0.05). Reports %GRR of study variation and, when a tolerance is given, of the tolerance, the repeatability / reproducibility split, the number of distinct categories, and the AIAG band (under 10% acceptable, 10–30% conditional, over 30% unacceptable). The standard study is 10 parts, 3 operators, 2–3 trials. Run it before trusting a Cpk.
入力スキーマ
{
"type": "object",
"properties": {
"operators": {
"minItems": 2,
"maxItems": 6,
"type": "array",
"items": {
"type": "object",
"properties": {
"name": {
"description": "Operator label, e.g. \"A\". For your own bookkeeping; the calculation and the readout identify operators by position.",
"type": "string",
"maxLength": 16
},
"trials": {
"minItems": 2,
"maxItems": 6,
"type": "array",
"items": {
"minItems": 2,
"maxItems": 30,
"type": "array",
"items": {
"type": "number"
}
},
"description": "One array per trial, each listing this operator's readings for parts 1…N in the same part order, in the dimension's own units"
}
},
"required": [
"trials"
]
}
},
"tolerance": {
"description": "Tolerance width (upper limit minus lower limit), same units as the readings. Enables %GRR of tolerance, which is what a Cpk study needs.",
"type": "number",
"exclusiveMinimum": 0
},
"context": {
"type": "object",
"properties": {
"material": {
"type": "string",
"maxLength": 64
},
"meltTempC": {
"type": "number"
},
"moldTempC": {
"type": "number"
}
}
},
"study_code": {
"description": "A study as the Lab card encodes it; use instead of the measurements (operators, tolerance)",
"type": "string",
"minLength": 1,
"maxLength": 8000
}
},
"$schema": "https://json-schema.org/draft/2020-12/schema"
}🟢get_study_protocol(study)
Return the full procedure for one study: what it is for, the equipment needed, the step-by-step method at the press, and what a good result looks like, so the numbers collected at the press are the ones the calculation needs.
入力スキーマ
{
"type": "object",
"properties": {
"study": {
"type": "string",
"enum": [
"viscosity_curve",
"cavity_balance",
"pressure_drop",
"cosmetic_window",
"gate_seal",
"cooling_time",
"gage_rr",
"process_capability"
],
"description": "Which study to explain"
}
},
"required": [
"study"
],
"$schema": "https://json-schema.org/draft/2020-12/schema"
}🟢plan_process_development(completed, setpoints)
Given the studies already run, return the full development sequence with each one marked done or outstanding, what each fixes, what it depends on, and which study to run next. The order matters: each study fixes a setpoint the next one holds constant, so running them out of order produces numbers that do not transfer.
入力スキーマ
{
"type": "object",
"properties": {
"completed": {
"default": [],
"description": "Studies already run",
"maxItems": 8,
"type": "array",
"items": {
"type": "string",
"enum": [
"viscosity_curve",
"cavity_balance",
"pressure_drop",
"cosmetic_window",
"gate_seal",
"cooling_time",
"gage_rr",
"process_capability"
]
}
},
"setpoints": {
"description": "Setpoints fixed so far, from each study result",
"type": "object",
"properties": {
"injectionVelocity": {
"type": "number"
},
"packPressure": {
"type": "number"
},
"meltTemp": {
"type": "number"
},
"holdTime": {
"type": "number"
},
"coolingTime": {
"type": "number"
}
},
"additionalProperties": false
}
},
"$schema": "https://json-schema.org/draft/2020-12/schema"
}🟢open_study_sheet(study, setpoints)
Open an empty data sheet for one study in an interactive card: the procedure beside a table the person fills in or pastes into, with the result computed as they type. Also returns the procedure as text and a link to the same calculator on the Lab website.
入力スキーマ
{
"type": "object",
"properties": {
"study": {
"type": "string",
"enum": [
"viscosity_curve",
"cavity_balance",
"pressure_drop",
"cosmetic_window",
"gate_seal",
"cooling_time",
"gage_rr",
"process_capability"
],
"description": "Which study"
},
"setpoints": {
"description": "Setpoints fixed so far, shown above the sheet",
"type": "object",
"properties": {
"injectionVelocity": {
"type": "number"
},
"packPressure": {
"type": "number"
},
"meltTemp": {
"type": "number"
},
"holdTime": {
"type": "number"
},
"coolingTime": {
"type": "number"
}
},
"additionalProperties": false
}
},
"required": [
"study"
],
"$schema": "https://json-schema.org/draft/2020-12/schema"
}コミュニティ
エビデンス