breadboardhub circuits
Check, simulate and design electronic circuits, with a link to run each one live in the browser.
사용해야 할까요
품질 및 안전성
도구 정의와 프로토콜 준수에 대한 자동 분석을 기반으로 합니다.
컨텍스트 비용
이는 서버의 도구가 모델의 컨텍스트에 로드될 때마다 소비되는 대략적인 토큰 수입니다. 수치가 높을수록 다른 작업에 사용할 수 있는 주의가 줄어듭니다.
설치
원클릭 설치
`claude_desktop_config.json` 파일에 다음을 추가하세요:
{
"mcpServers": {
"circuits": {
"url": "https://www.breadboardhub.com/api/mcp"
}
}
}원격 엔드포인트
https://www.breadboardhub.com/api/mcpstreamable-http할 수 있는 일
도구 목록
도구 (7)
🟢check_circuit(circuit, request)
Free and instant. Checks a CircuitJS circuit for structural problems: unknown parts, loose ends, parts with no power source, LEDs with the wrong diode model, labels on top of parts. With "request", also checks it contains the parts asked for (a bulb, an ammeter, a voltmeter, a switch). Returns the problems, the parts list and a link that opens the circuit running live.
입력 스키마
{
"type": "object",
"properties": {
"circuit": {
"type": "string",
"description": "The circuit: a CircuitJS export (a \"$\" options line, then one part per line, at most 20,000 characters), or a breadboardhub.com/sim link that carries one."
},
"request": {
"type": "string",
"description": "Optional: what the circuit is meant to be, in plain words (at most 1,000 characters)."
}
},
"required": [
"circuit"
]
}🟢simulate_circuit(circuit)
Runs a CircuitJS circuit in a real circuit simulator until it settles and returns the voltage across and current through each part, plus faults found: a short circuit, nothing flowing, an LED over its current rating, a bulb too dim to light. Takes 10 to 30 seconds. Limited per day; an API token raises the limit.
입력 스키마
{
"type": "object",
"properties": {
"circuit": {
"type": "string",
"description": "The circuit: a CircuitJS export (a \"$\" options line, then one part per line, at most 20,000 characters), or a breadboardhub.com/sim link that carries one."
}
},
"required": [
"circuit"
]
}🟢design_circuit(description)
Designs an electronic circuit (and an Arduino sketch, for microcontroller projects) from a plain description, such as "a 9V battery lighting a red LED". The design passes breadboardhub's structural checks, with one corrected attempt if needed. Returns the CircuitJS circuit, any code, the check result, a link that opens it running live, and the parts to buy with supplier links. Takes up to 2 minutes. Limited per day; an API token raises the limit.
입력 스키마
{
"type": "object",
"properties": {
"description": {
"type": "string",
"description": "What to design, in plain words (10 to 1,000 characters)."
}
},
"required": [
"description"
]
}🟡edit_circuit(circuit, change, purpose)
Changes a CircuitJS circuit as asked in plain words, such as "make the two resistors parallel", "add a voltmeter across the LED" or "use a 12V supply", or answers a question about it ("what does the 10 mH part do?"). The changed circuit passes breadboardhub's structural checks, with one corrected attempt if needed; a change that would break the circuit is refused and the circuit is returned unchanged. Returns the new circuit, a link that opens it running live, and the parts to buy with supplier links. Takes up to a minute. Counts toward the daily design limit.
입력 스키마
{
"type": "object",
"properties": {
"circuit": {
"type": "string",
"description": "The circuit: a CircuitJS export (a \"$\" options line, then one part per line, at most 20,000 characters), or a breadboardhub.com/sim link that carries one."
},
"change": {
"type": "string",
"description": "What to change, or a question about the circuit, in plain words (3 to 1,000 characters)."
},
"purpose": {
"type": "string",
"description": "Optional: what the circuit is for, in plain words (at most 1,000 characters). Helps keep the change in line with it."
}
},
"required": [
"circuit",
"change"
]
}🟢calculate(calculator, inputs)
Free and instant. Runs one of breadboardhub's electronics calculators and returns the answer, the working, and a link that opens the circuit running live. Calculators and their inputs: resistor-color-code (d1, d2, d3, exponent, tolerance); led-resistor (supplyV, ledV, currentA); voltage-divider (vin, r1, r2); rc-time-constant (ohms, farads, supplyV); ohms-law (volts, ohms); series-parallel-resistor (arrangement, r1, r2, r3, r4, supplyV); transistor-base-resistor (loadV, loadA, controlV, hfe, overdrive); 555-timer (r1, r2, farads, supplyV). Values may use SI prefixes ("4.7k", "100n", "15m"). Band colors may be given as color names ("yellow"), d3 as "none" on a 4-band resistor, and arrangement as "series" or "parallel". Inputs left out take the calculator's example values, listed in the answer.
입력 스키마
{
"type": "object",
"properties": {
"calculator": {
"type": "string",
"enum": [
"resistor-color-code",
"led-resistor",
"voltage-divider",
"rc-time-constant",
"ohms-law",
"series-parallel-resistor",
"transistor-base-resistor",
"555-timer"
]
},
"inputs": {
"type": "object",
"additionalProperties": {
"type": [
"string",
"number"
]
},
"description": "The calculator's inputs by name, such as { \"supplyV\": \"9\", \"ledV\": \"2\", \"currentA\": \"15m\" }."
}
},
"required": [
"calculator"
]
}🟢search_designs(query, limit)
Searches public circuit, firmware and schematic designs shared on breadboardhub. Returns names, types, tags, stars and links.
입력 스키마
{
"type": "object",
"properties": {
"query": {
"type": "string",
"description": "Words to search for (2 to 100 characters)."
},
"limit": {
"type": "integer",
"minimum": 1,
"maximum": 10
}
},
"required": [
"query"
]
}🟢get_design(username, slug)
Gets one public design by its owner's username and the design's slug, as shown in search results and in breadboardhub design links.
입력 스키마
{
"type": "object",
"properties": {
"username": {
"type": "string"
},
"slug": {
"type": "string"
}
},
"required": [
"username",
"slug"
]
}커뮤니티
증거