reference
Brand-neutral cutting tool reference: grade cross-reference, materials, turning starting values.
사용해야 할까요
품질 및 안전성
도구 정의와 프로토콜 준수에 대한 자동 분석을 기반으로 합니다.
컨텍스트 비용
이는 서버의 도구가 모델의 컨텍스트에 로드될 때마다 소비되는 대략적인 토큰 수입니다. 수치가 높을수록 다른 작업에 사용할 수 있는 주의가 줄어듭니다.
설치
원클릭 설치
`claude_desktop_config.json` 파일에 다음을 추가하세요:
{
"mcpServers": {
"reference": {
"url": "https://cuttingtoolsai.eu/mcp"
}
}
}원격 엔드포인트
https://cuttingtoolsai.eu/mcpstreamable-http할 수 있는 일
도구 목록
도구 (3)
🟡grade_cross_reference(grade, brand)
Cross-reference a carbide insert grade across manufacturers. Given any maker's grade (e.g. GC4325, KC5010, IC807), returns its ISO 513 application position(s) and the grades other manufacturers publish at the same position, each row carrying its verification status (multi-source consensus / confirmed by 2+ manufacturer charts / single-source chart). Comparable-at-ISO-position is a trial starting point, not an interchangeability guarantee.
입력 스키마
{
"type": "object",
"properties": {
"grade": {
"type": "string",
"description": "The grade code to cross-reference, e.g. \"GC4325\" or \"KC5010\""
},
"brand": {
"type": "string",
"description": "Optional: the grade's manufacturer, to disambiguate codes used by several makers"
}
},
"required": [
"grade"
]
}⚪material_cross_reference(designation)
Cross-reference a workpiece material designation across standards (EN, Werkstoffnummer, AISI/ASTM/UNS, JIS) from a curated 77-material set, e.g. "1.4404" -> AISI 316L / X2CrNiMo17-12-2 / SUS316L. Each match includes the ISO 513 machining group, a machining note, and whether the pairing is a same-composition equivalent or a nearest commonly-cited counterpart. Always verify against the material certificate.
입력 스키마
{
"type": "object",
"properties": {
"designation": {
"type": "string",
"description": "Any designation: EN name (42CrMo4), Werkstoffnummer (1.7225), AISI/UNS (4140, G41400), JIS (SCM440), or a common name (316L, Inconel 718)"
}
},
"required": [
"designation"
]
}⚪speeds_feeds_starting_values(iso_group)
Starting cutting-speed and feed ranges for coated-carbide TURNING by ISO 513 material group (P steel, M stainless, K cast iron, N aluminium, S_TI titanium, S_NI nickel superalloy, H hardened steel). These are deliberately wide practice ranges, not from any one catalog; the maker's data for the exact grade always wins.
입력 스키마
{
"type": "object",
"properties": {
"iso_group": {
"type": "string",
"enum": [
"P",
"M",
"K",
"N",
"S_TI",
"S_NI",
"H"
],
"description": "ISO 513 group. Use S_TI for titanium, S_NI for nickel superalloys."
}
},
"required": [
"iso_group"
]
}커뮤니티
증거