Notify Sound
Design notification sounds from layered tones and get an editor link to play and download.
사용해야 할까요
품질 및 안전성
A
도구 정의와 프로토콜 준수에 대한 자동 분석을 기반으로 합니다.
컨텍스트 비용
~2,244토큰 (도구 정의)
~3.8 KB일반적인 응답 크기
중간 정도의 주의 영향 (128k 컨텍스트의 1.75%)
이는 서버의 도구가 모델의 컨텍스트에 로드될 때마다 소비되는 대략적인 토큰 수입니다. 수치가 높을수록 다른 작업에 사용할 수 있는 주의가 줄어듭니다.
설치
원클릭 설치
`claude_desktop_config.json` 파일에 다음을 추가하세요:
{
"mcpServers": {
"notify-sound": {
"url": "https://notifysound.com/mcp"
}
}
}원격 엔드포인트
https://notifysound.com/mcpstreamable-http할 수 있는 일
도구 목록
도구 (5)
🟢 읽기 전용🟡 쓰기🔴 삭제⚪ 알 수 없음
🟡create_sound(name, duration, effect, layers)
Build a notification sound from your own layer design and get an editor link for it. The link opens the sound in the editor, where the user plays, tweaks and downloads it. Returns the link, the stored sound and warnings for any value that was out of range, rounded or ignored. Read get_sound_guide first.
입력 스키마
{
"type": "object",
"properties": {
"name": {
"type": "string",
"maxLength": 32,
"description": "Name. Sound name, up to 32 characters."
},
"duration": {
"type": "number",
"minimum": 0.003,
"maximum": 5,
"default": 0.1,
"description": "Note length. How long each note is held, shared by every layer and every repeat. Unit: s. Range 0.003 to 5, step 0.001, default 0.1."
},
"effect": {
"type": "object",
"description": "One effect over the whole sound.",
"properties": {
"type": {
"type": "string",
"enum": [
"none",
"reverb",
"chamber",
"echo",
"pingpong",
"chorus",
"phone",
"crunch"
],
"default": "none",
"description": "Effect. One effect over the whole sound. Options: None: dry, no effect; Reverb: soft room, a gentle space; Chamber: big hall, long airy tail; Echo: repeats that fade away; Ping-Pong: echo that bounces left and right; Chorus: wider and shimmery; Phone: tiny speaker sound; Crunch: rough 8-bit edge."
},
"amount": {
"type": "number",
"minimum": 0,
"maximum": 1,
"default": 0.3,
"description": "Amount. Effect mix. 0 is dry, 1 is fully wet. Unit: 0 to 1. Range 0 to 1, step 0.01, default 0.3."
}
},
"additionalProperties": false
},
"layers": {
"type": "array",
"description": "Layers play together, each from its own Start after. Leave out any field at its default. Up to 16 layers.",
"minItems": 1,
"maxItems": 16,
"items": {
"type": "object",
"properties": {
"freq": {
"type": "number",
"minimum": 40,
"maximum": 4000,
"default": 880,
"description": "Pitch. Note pitch. On a noise layer it is the centre of the hiss band. Unit: Hz. Range 40 to 4000, step 1, default 880."
},
"wave": {
"type": "string",
"enum": [
"sine",
"triangle",
"sawtooth",
"square",
"noise"
],
"default": "sine",
"description": "Wave. Wave shape. Options: Sine: smooth and pure; Triangle: soft and woody; Saw: bright and buzzy; Square: sharp and electronic; Noise: hiss, wind and rumble."
},
"attack": {
"type": "number",
"minimum": 0.0005,
"maximum": 1,
"default": 0.005,
"description": "Attack. Time from silence to full level. Under 0.005 s gives a hard click at the start. Unit: s. Range 0.0005 to 1, step 0.0005, default 0.005."
},
"decay": {
"type": "number",
"minimum": 0.003,
"maximum": 2,
"default": 0.3,
"description": "Decay. Time from full level down to the Hold level while the note is held. Unit: s. Range 0.003 to 2, step 0.001, default 0.3."
},
"sustain": {
"type": "number",
"minimum": 0,
"maximum": 1,
"default": 0,
"description": "Hold. Level kept after Decay while the note is held. 0 is a struck or plucked note, 1 an organ-like note. Unit: 0 to 1. Range 0 to 1, step 0.01, default 0."
},
"release": {
"type": "number",
"minimum": 0.003,
"maximum": 5,
"default": 0.4,
"description": "Ring out. Fade after the note ends. The main tail control. Unit: s. Range 0.003 to 5, step 0.001, default 0.4."
},
"delay": {
"type": "number",
"minimum": 0,
"maximum": 5,
"default": 0,
"description": "Start after. When this layer starts, counted from the start of the sound. Spaces the notes of a melody. Unit: s. Range 0 to 5, step 0.01, default 0."
},
"gain": {
"type": "number",
"minimum": 0,
"maximum": 1,
"default": 1,
"description": "Level. Layer loudness. Unit: 0 to 1. Range 0 to 1, step 0.01, default 1."
},
"pitchSlide": {
"type": "number",
"minimum": -24,
"maximum": 24,
"default": 0,
"description": "Slide. Pitch glide over the Note length, up when positive, down when negative. Unit: semitones. Range -24 to 24, step 1, default 0."
},
"fmAmount": {
"type": "number",
"minimum": 0,
"maximum": 1,
"default": 0,
"description": "Wobble. Vibrato depth. 1 swings the pitch 4 semitones each way. Unit: 0 to 1. Range 0 to 1, step 0.01, default 0."
},
"fmRate": {
"type": "number",
"minimum": 0.5,
"maximum": 50,
"default": 6,
"description": "Wobble speed. Vibrato speed. Unit: Hz. Range 0.5 to 50, step 0.1, default 6."
},
"amAmount": {
"type": "number",
"minimum": 0,
"maximum": 1,
"default": 0,
"description": "Flutter. Tremolo depth: how far the level dips. Unit: 0 to 1. Range 0 to 1, step 0.01, default 0."
},
"amRate": {
"type": "number",
"minimum": 0.5,
"maximum": 50,
"default": 8,
"description": "Flutter speed. Tremolo speed. Unit: Hz. Range 0.5 to 50, step 0.1, default 8."
},
"pan": {
"type": "number",
"minimum": -1,
"maximum": 1,
"default": 0,
"description": "Balance. Stereo position. -1 is left, 1 is right. Unit: -1 to 1. Range -1 to 1, step 0.01, default 0."
},
"repeat": {
"type": "number",
"minimum": 1,
"maximum": 5,
"default": 1,
"description": "Times. How many times the layer plays its note. Unit: count. Range 1 to 5, step 1, default 1."
},
"repeatGap": {
"type": "number",
"minimum": 0.02,
"maximum": 1,
"default": 0.1,
"description": "Gap. Silence between one repeat ending and the next starting. Unit: s. Range 0.02 to 1, step 0.01, default 0.1."
},
"enabled": {
"type": "boolean",
"default": true,
"description": "On. A layer that is off stays in the sound but is silent."
},
"seed": {
"type": "integer",
"minimum": 0,
"maximum": 2147483647,
"description": "Noise seed. Fixes the noise pattern so the sound is the same every play. Set one on every noise layer. Noise layers only."
},
"randomNoise": {
"type": "boolean",
"default": false,
"description": "Random. New noise on every play. Keep false. Noise layers only."
},
"sharpness": {
"type": "number",
"minimum": 0.5,
"maximum": 20,
"default": 1.2,
"description": "Sharpness. Width of the hiss band. Low is a wide hiss, high is close to a pitched whistle. Range 0.5 to 20, step 0.1, default 1.2. Noise layers only."
},
"noiseColor": {
"type": "string",
"enum": [
"white",
"pink",
"brown"
],
"default": "white",
"description": "Noise type. Noise colour. Options: White: bright, even hiss; Pink: softer, like wind; Brown: deep rumble. Noise layers only."
}
},
"additionalProperties": false
}
}
},
"required": [
"layers"
],
"additionalProperties": false
}🟢read_sound(link)
Turn a share link (or the code after #s=) back into the sound design, to change it and call create_sound again.
입력 스키마
{
"type": "object",
"properties": {
"link": {
"type": "string",
"description": "A share link, \"#s=...\" or the bare code."
}
},
"required": [
"link"
],
"additionalProperties": false
}🟢list_library_sounds(group, query)
List the built-in sounds by group, or search them by name. Without arguments it lists every group with its sound names. Use a close built-in sound as a starting point.
입력 스키마
{
"type": "object",
"properties": {
"group": {
"type": "string",
"enum": [
"featured",
"classics",
"chords",
"messages",
"alerts",
"arcade",
"chiptune",
"chiptunes",
"scifi",
"nature",
"spooky",
"motion"
],
"description": "Only this group, with each sound described."
},
"query": {
"type": "string",
"description": "Search sound names, e.g. \"bell\" or \"coin\"."
}
},
"additionalProperties": false
}🟢get_library_sound(name, group)
Get the full design of a built-in sound and its editor link, to use as a starting point for create_sound.
입력 스키마
{
"type": "object",
"properties": {
"name": {
"type": "string",
"description": "Sound name, e.g. \"Tri-Tone\"."
},
"group": {
"type": "string",
"enum": [
"featured",
"classics",
"chords",
"messages",
"alerts",
"arcade",
"chiptune",
"chiptunes",
"scifi",
"nature",
"spooky",
"motion"
],
"description": "Group to look in, when a name is in more than one."
}
},
"required": [
"name"
],
"additionalProperties": false
}🟢get_sound_guide
How sounds are built: layers, envelope, pitch, timing, noise, levels and effects, with example designs. Read it once before designing.
입력 스키마
{
"type": "object",
"properties": {},
"additionalProperties": false
}커뮤니티
증거
최근 관측
검증됨버전이 기록되지 않음도구 5개