reference
Brand-neutral cutting tool reference: grade cross-reference, materials, turning starting values.
我该使用它吗
质量与安全性
基于对工具定义和协议合规性的自动分析。
上下文开销
这是每次将服务器的工具加载到模型上下文窗口时所消耗的大致 token 数。数值越高，可用于其他任务的注意力就越少。
安装
一键安装
将以下内容添加到你的 `claude_desktop_config.json` 文件中：
{
"mcpServers": {
"reference": {
"url": "https://cuttingtoolsai.eu/mcp"
}
}
}远程端点
https://cuttingtoolsai.eu/mcpstreamable-http它能做什么
工具清单
工具（3）
🟡grade_cross_reference(grade, brand)
Cross-reference a carbide insert grade across manufacturers. Given any maker's grade (e.g. GC4325, KC5010, IC807), returns its ISO 513 application position(s) and the grades other manufacturers publish at the same position, each row carrying its verification status (multi-source consensus / confirmed by 2+ manufacturer charts / single-source chart). Comparable-at-ISO-position is a trial starting point, not an interchangeability guarantee.
输入模式
{
"type": "object",
"properties": {
"grade": {
"type": "string",
"description": "The grade code to cross-reference, e.g. \"GC4325\" or \"KC5010\""
},
"brand": {
"type": "string",
"description": "Optional: the grade's manufacturer, to disambiguate codes used by several makers"
}
},
"required": [
"grade"
]
}⚪material_cross_reference(designation)
Cross-reference a workpiece material designation across standards (EN, Werkstoffnummer, AISI/ASTM/UNS, JIS) from a curated 77-material set, e.g. "1.4404" -> AISI 316L / X2CrNiMo17-12-2 / SUS316L. Each match includes the ISO 513 machining group, a machining note, and whether the pairing is a same-composition equivalent or a nearest commonly-cited counterpart. Always verify against the material certificate.
输入模式
{
"type": "object",
"properties": {
"designation": {
"type": "string",
"description": "Any designation: EN name (42CrMo4), Werkstoffnummer (1.7225), AISI/UNS (4140, G41400), JIS (SCM440), or a common name (316L, Inconel 718)"
}
},
"required": [
"designation"
]
}⚪speeds_feeds_starting_values(iso_group)
Starting cutting-speed and feed ranges for coated-carbide TURNING by ISO 513 material group (P steel, M stainless, K cast iron, N aluminium, S_TI titanium, S_NI nickel superalloy, H hardened steel). These are deliberately wide practice ranges, not from any one catalog; the maker's data for the exact grade always wins.
输入模式
{
"type": "object",
"properties": {
"iso_group": {
"type": "string",
"enum": [
"P",
"M",
"K",
"N",
"S_TI",
"S_NI",
"H"
],
"description": "ISO 513 group. Use S_TI for titanium, S_NI for nickel superalloys."
}
},
"required": [
"iso_group"
]
}社区
证据