Firstline Restoration Tools

Water damage restoration and flood-prevention planning tools.

Should I use this

Quality & Safety

A
Description quality
86%
Schema completeness
100%
Naming quality
80%
Poisoning risk
100%
Permission match
100%
Protocol compliance
100%

Findings (5)

  • LOWTool 'mould_size_checker' description lacks action verbin mould_size_checker
  • LOWTool 'frozen_pipe_checker' description lacks action verbin frozen_pipe_checker
  • LOWTool 'dehumidifier_size_calculator' description lacks action verbin dehumidifier_size_calculator
  • LOWTool 'indoor_humidity_target_by_outdoor_temp' name length outside 3-30 rangein indoor_humidity_target_by_outdoor_temp
  • LOWTool 'basement_flooding_subsidy_eligibility' name length outside 3-30 rangein basement_flooding_subsidy_eligibility

Based on automated analysis of tool definitions and protocol compliance.

Context Cost

~2,598Tokens (tool definitions)
~1.9 KBTypical response size
Significant attention impact (2.03% of 128k context)

This is the approximate number of tokens consumed each time the server's tools are loaded into a model's context. Higher counts reduce the attention available for other tasks.

Install

One-Click Install

Add this to your `claude_desktop_config.json` file:

{
  "mcpServers": {
    "tools": {
      "url": "https://firstlinerestoration.com/mcp"
    }
  }
}

Remote endpoints

https://firstlinerestoration.com/mcpstreamable-http

What it can do

Tool inventory

Tools (12)

🟢 Read-only🟡 Write🔴 Delete⚪ Unknown
🟢sump_pump_vs_backwater_valve(observation)

Compare what a sump pump and backwater valve do, and prepare questions for a basement flood assessment.

Input Schema

{
  "type": "object",
  "properties": {
    "observation": {
      "type": "string",
      "enum": [
        "drain",
        "foundation",
        "both",
        "unsure"
      ],
      "description": "Where water appeared, or whether you are planning ahead."
    }
  },
  "required": [
    "observation"
  ]
}
🟢water_damage_checker(source, hours, area, materials)

Likely water damage category (1, 2 or 3), the mould risk window, first safety steps and what to record for an insurer.

Input Schema

{
  "type": "object",
  "properties": {
    "source": {
      "type": "string",
      "enum": [
        "supply",
        "appliance",
        "roof",
        "ground",
        "sewer",
        "toilet"
      ],
      "description": "Where the water came from."
    },
    "hours": {
      "type": "number",
      "minimum": 0,
      "description": "How long the water has been there. The page offers 12 (under 24 hours), 36 (24 to 48), 60 (48 to 72) and 96 (over 72); any number of hours works. Unit: hours.",
      "maximum": 10000
    },
    "area": {
      "type": "string",
      "enum": [
        "one",
        "several",
        "floor"
      ],
      "description": "How large the affected area is."
    },
    "materials": {
      "type": "array",
      "items": {
        "type": "string",
        "enum": [
          "drywall",
          "carpet",
          "hardwood",
          "insulation",
          "ceiling",
          "cabinets"
        ]
      },
      "description": "What is wet. Comma separated, optional."
    }
  },
  "required": [
    "source",
    "hours",
    "area"
  ]
}
🟢mould_size_checker(unit, patches, largest, total, flags)

Whether mould patches are a small, medium or large area under Health Canada guidance, and when a professional is recommended.

Input Schema

{
  "type": "object",
  "properties": {
    "unit": {
      "type": "string",
      "enum": [
        "m2",
        "ft2"
      ],
      "description": "Unit for largest and total.",
      "default": "m2"
    },
    "patches": {
      "type": "integer",
      "minimum": 1,
      "description": "Number of separate patches.",
      "maximum": 99
    },
    "largest": {
      "type": "number",
      "minimum": 0,
      "description": "Area of the largest single patch, in the chosen unit."
    },
    "total": {
      "type": "number",
      "minimum": 0,
      "description": "Total area of all patches combined, in the chosen unit (raised to the largest patch if smaller)."
    },
    "flags": {
      "type": "array",
      "items": {
        "type": "string",
        "enum": [
          "hidden",
          "returned",
          "contam",
          "vuln"
        ]
      },
      "description": "Anything that applies. Comma separated, optional."
    }
  },
  "required": [
    "patches",
    "largest",
    "total"
  ]
}
🟢sewage_backup_checker(home_type, electrical_hazard, household, affected_items)

First steps after a sewage backup, health precautions, and which affected items can be cleaned and disinfected or must be thrown away.

Input Schema

{
  "type": "object",
  "properties": {
    "home_type": {
      "type": "string",
      "enum": [
        "municipal",
        "private",
        "tenant"
      ],
      "description": "What kind of home it is."
    },
    "electrical_hazard": {
      "type": "string",
      "enum": [
        "yes",
        "no",
        "unsure"
      ],
      "description": "Is there standing water near outlets, appliances or wiring?"
    },
    "household": {
      "type": "array",
      "items": {
        "type": "string",
        "enum": [
          "child",
          "preg",
          "resp",
          "well"
        ]
      },
      "description": "Does anyone at home fall into these groups? Comma separated, optional."
    },
    "affected_items": {
      "type": "array",
      "items": {
        "type": "string",
        "enum": [
          "carpet",
          "upholstery",
          "toys",
          "books",
          "food",
          "drywall",
          "hard",
          "hardtoys",
          "appliance"
        ]
      },
      "description": "What the sewage water reached. Comma separated, optional."
    }
  },
  "required": [
    "home_type",
    "electrical_hazard"
  ]
}
🟢frozen_pipe_checker(overnight_low, pipe_area_warm, occupancy, pipe_locations)

Which City of Toronto frozen pipe risk factors apply, what to do tonight, and how to thaw a pipe safely.

Input Schema

{
  "type": "object",
  "properties": {
    "overnight_low": {
      "type": "string",
      "enum": [
        "mild",
        "cold"
      ],
      "description": "The overnight low forecast."
    },
    "pipe_area_warm": {
      "type": "string",
      "enum": [
        "yes",
        "no",
        "unsure"
      ],
      "description": "Do the rooms where the pipes run stay above 8 C?"
    },
    "occupancy": {
      "type": "string",
      "enum": [
        "home",
        "away"
      ],
      "description": "Is the home occupied and heated?"
    },
    "pipe_locations": {
      "type": "array",
      "items": {
        "type": "string",
        "enum": [
          "exterior",
          "foundation",
          "meter",
          "unheated",
          "cabinet"
        ]
      },
      "description": "Where the pipes run. Comma separated, optional."
    }
  },
  "required": [
    "overnight_low",
    "pipe_area_warm",
    "occupancy"
  ]
}
🟢after_a_fire_checklist(cleared, can_stay, items_left)

A tailored checklist for after a house or building fire: when it is safe to go in, securing the property, food and smoke cautions, and what to record for an insurer.

Input Schema

{
  "type": "object",
  "properties": {
    "cleared": {
      "type": "string",
      "enum": [
        "yes",
        "no"
      ],
      "description": "Has the fire department or your insurer said it is safe to go in?"
    },
    "can_stay": {
      "type": "string",
      "enum": [
        "yes",
        "no"
      ],
      "description": "Can you stay in the home?"
    },
    "items_left": {
      "type": "array",
      "items": {
        "type": "string",
        "enum": [
          "food",
          "soft",
          "appliance",
          "open"
        ]
      },
      "description": "What was left in the home. Comma separated, optional."
    }
  },
  "required": [
    "cleared",
    "can_stay"
  ]
}
🟢insurance_claim_checklist(loss_type, can_stay, insurer_contacted)

A tailored checklist of the photos, lists, receipts and records to collect after water, fire or storm damage.

Input Schema

{
  "type": "object",
  "properties": {
    "loss_type": {
      "type": "string",
      "enum": [
        "water",
        "fire",
        "storm"
      ],
      "description": "What happened."
    },
    "can_stay": {
      "type": "string",
      "enum": [
        "yes",
        "no"
      ],
      "description": "Can you stay in the home?"
    },
    "insurer_contacted": {
      "type": "string",
      "enum": [
        "yes",
        "no"
      ],
      "description": "Have you spoken to your insurer yet?"
    }
  },
  "required": [
    "loss_type",
    "can_stay",
    "insurer_contacted"
  ]
}
🟢dehumidifier_size_calculator(unit, area, dampness)

Dehumidifier capacity in pints per day for a room or basement, from its floor area and how damp it is, using the ENERGY STAR sizing table.

Input Schema

{
  "type": "object",
  "properties": {
    "unit": {
      "type": "string",
      "enum": [
        "ft2",
        "m2"
      ],
      "description": "Unit for area.",
      "default": "ft2"
    },
    "area": {
      "type": "number",
      "minimum": 1,
      "description": "Floor area of the space to dry, in the chosen unit.",
      "maximum": 100000
    },
    "dampness": {
      "type": "string",
      "enum": [
        "mild",
        "damp",
        "wet"
      ],
      "description": "How damp the space is without a dehumidifier."
    }
  },
  "required": [
    "area",
    "dampness"
  ]
}
🟢sump_pump_size_calculator(station, unit, roof_area, paved_area, return_period, ...)

Litres per minute of rain that could reach a sump pit from a roof and paved area, using Environment and Climate Change Canada rainfall data for Toronto City or Toronto Pearson.

Input Schema

{
  "type": "object",
  "properties": {
    "station": {
      "type": "string",
      "enum": [
        "toronto_city",
        "toronto_pearson"
      ],
      "description": "Which rainfall station is nearer to the property."
    },
    "unit": {
      "type": "string",
      "enum": [
        "m2",
        "ft2"
      ],
      "description": "Unit for the areas.",
      "default": "m2"
    },
    "roof_area": {
      "type": "number",
      "minimum": 0,
      "description": "Roof area (plan view, as seen from above) draining toward the pit, in the chosen unit.",
      "maximum": 100000
    },
    "paved_area": {
      "type": "number",
      "minimum": 0,
      "description": "Paved area draining toward the pit, in the chosen unit. Optional.",
      "maximum": 100000,
      "default": 0
    },
    "return_period": {
      "type": "string",
      "enum": [
        "5",
        "10",
        "25",
        "50",
        "100"
      ],
      "description": "How rare a storm to plan for, in years."
    },
    "storm": {
      "type": "string",
      "enum": [
        "15min",
        "30min",
        "1h",
        "2h",
        "6h"
      ],
      "description": "Storm length."
    }
  },
  "required": [
    "station",
    "roof_area",
    "return_period",
    "storm"
  ]
}
🟢indoor_humidity_target_by_outdoor_temp(outdoor_temp, current_rh)

The highest indoor relative humidity that limits window condensation at a given outdoor temperature, with a check against the Health Canada 30 to 50 per cent range.

Input Schema

{
  "type": "object",
  "properties": {
    "outdoor_temp": {
      "type": "number",
      "minimum": -50,
      "description": "Outdoor air temperature in degrees Celsius (negative for below zero). Unit: C.",
      "maximum": 40
    },
    "current_rh": {
      "type": "number",
      "minimum": 0,
      "description": "Your current indoor relative humidity reading, in per cent. Optional. Unit: per cent.",
      "maximum": 100
    }
  },
  "required": [
    "outdoor_temp"
  ]
}
🟢smoke_alarm_placement_checker(building, storeys, sleeping_storeys, bedrooms, shared_egress, ...)

Where smoke alarms go in an Ontario home and the least number needed, from the storeys, bedrooms and building type, with maintenance duties for owners and tenants.

Input Schema

{
  "type": "object",
  "properties": {
    "building": {
      "type": "string",
      "enum": [
        "part9",
        "larger"
      ],
      "description": "Type of building."
    },
    "storeys": {
      "type": "integer",
      "minimum": 1,
      "description": "Storeys in your home or suite, counting a basement.",
      "maximum": 4
    },
    "sleeping_storeys": {
      "type": "integer",
      "minimum": 0,
      "description": "How many of those storeys have bedrooms.",
      "maximum": 4
    },
    "bedrooms": {
      "type": "integer",
      "minimum": 0,
      "description": "Number of bedrooms (sleeping rooms) in the home or suite.",
      "maximum": 12
    },
    "shared_egress": {
      "type": "string",
      "enum": [
        "no",
        "yes"
      ],
      "description": "Is the house one with a secondary suite, such as a basement apartment, that shares an interior exit or common area?",
      "default": "no"
    },
    "tenure": {
      "type": "string",
      "enum": [
        "owner",
        "tenant",
        "landlord"
      ],
      "description": "Your position.",
      "default": "owner"
    }
  },
  "required": [
    "building",
    "storeys",
    "sleeping_storeys",
    "bedrooms"
  ]
}
🟢basement_flooding_subsidy_eligibility(location, property_type, ownership, downspouts, paving, ...)

Which items of the City of Toronto Basement Flooding Protection Subsidy Program apply to a home, which program conditions are met or need checking, and what to keep for the application. No dollar figures.

Input Schema

{
  "type": "object",
  "properties": {
    "location": {
      "type": "string",
      "enum": [
        "toronto",
        "other"
      ],
      "description": "Where the property is."
    },
    "property_type": {
      "type": "string",
      "enum": [
        "single",
        "duplex",
        "triplex",
        "fourplex",
        "other"
      ],
      "description": "Type of property."
    },
    "ownership": {
      "type": "string",
      "enum": [
        "owner",
        "not_owner"
      ],
      "description": "Are you the registered owner?"
    },
    "downspouts": {
      "type": "string",
      "enum": [
        "disconnected",
        "exempt",
        "not_disconnected",
        "unsure"
      ],
      "description": "Are the eavestrough downspouts disconnected from the City sewer?"
    },
    "paving": {
      "type": "string",
      "enum": [
        "none",
        "complies",
        "unsure",
        "not_complies"
      ],
      "description": "Do paved areas in the front yard, including parking pads, follow the City zoning by-law?"
    },
    "debts": {
      "type": "string",
      "enum": [
        "none",
        "owing",
        "unsure"
      ],
      "description": "Do you owe the City any taxes or debts?"
    },
    "work": {
      "type": "array",
      "items": {
        "type": "string",
        "enum": [
          "plumbing_assessment",
          "backwater_valve",
          "sump_pump",
          "battery_backup",
          "weeping_tile_severance",
          "downspout_disconnection"
        ]
      },
      "description": "Work you have done or plan to do. Comma separated."
    },
    "timing": {
      "type": "string",
      "enum": [
        "planned",
        "done_after",
        "done_before"
      ],
      "description": "When was or will the work be done?"
    },
    "months_since": {
      "type": "number",
      "minimum": 0,
      "description": "Months since the work was finished. Only for work already done. Optional. Unit: months.",
      "maximum": 600
    },
    "licence": {
      "type": "string",
      "enum": [
        "yes",
        "no",
        "unsure"
      ],
      "description": "Does the contractor who did or will do the work hold a valid City of Toronto business licence?"
    }
  },
  "required": [
    "location",
    "property_type",
    "ownership",
    "downspouts",
    "paving",
    "debts",
    "work",
    "timing",
    "licence"
  ]
}

Community

Rate this Server

Evidence

Recent observations

verifiedversion not recorded12 tools