ibc-mcp

Physics interior-ballistics solver: solves, ladders, trajectory, lookups. Published error rates.

Should I use this

Quality & Safety

A
Description quality
100%
Schema completeness
90%
Naming quality
93%
Poisoning risk
100%
Permission match
100%
Protocol compliance
100%

Based on automated analysis of tool definitions and protocol compliance.

Context Cost

~3,368Tokens (tool definitions)
~4.1 KBTypical response size
Significant attention impact (2.63% of 128k context)

This is the approximate number of tokens consumed each time the server's tools are loaded into a model's context. Higher counts reduce the attention available for other tasks.

Install

One-Click Install

Add this to your `claude_desktop_config.json` file:

{
  "mcpServers": {
    "ibc-mcp": {
      "url": "https://reloadingcalc.com/mcp"
    }
  }
}

Remote endpoints

https://reloadingcalc.com/mcpstreamable-http

What it can do

Tool inventory

Tools (6)

🟢 Read-only🟡 Write🔴 Delete⚪ Unknown
🟡solve_internal_ballistics(caliber, bullet, powder, charge_gr, barrel_len_in, ...)

Solve one internal-ballistics point: modeled velocity/energy/pressure for an exact cartridge+bullet+powder+charge specification, wrapped in the non-removable safety envelope (charge range, closed-enum warnings, assumptions). Returns the SAME envelope as POST /v1/solve. Measured accuracy: velocity averages about 7.5% error against 30,327 published loads; the pressure a user sees displayed reads 7.38% low against printed CUP figures and 0.91% low against printed psi figures at the median, so verdicts are relative — start low and work up. For load DEVELOPMENT prefer generate_load_ladder (a work-up ladder with per-rung nodes). SAFETY (verbatim policy): Returns modeled pressure and velocity from a physics solver, plus a safety envelope. This is NOT published load data. Always present the envelope, warnings, and disclaimer to the user; never state a single charge weight as a recommendation. Pressure fields (p_max_bar, p_max_psi, saami_max_bar) are modeled compliance-vs-SAAMI-ceiling indicators on the model's CUP-equivalent scale, while pressure_percent_saami is reported piezo-equivalent: the percent equals p_max_bar x 1.2783 / saami_max_bar, so it is NOT peak / ceiling as served. Not measured proof pressures and not accuracy-validated numbers: the validation corpus is velocity-only. Treat them as position relative to the ceiling, with real-world spread unknown. not_for_loading_decisions_without_published_data: this result is a model output. Do not work up a load from it alone — cross-check against published data for your exact components before loading.

Input Schema

{
  "type": "object",
  "properties": {
    "caliber": {
      "description": "Cartridge name or caliber.csv id",
      "maxLength": 200,
      "minLength": 1,
      "title": "Caliber",
      "type": "string"
    },
    "bullet": {
      "description": "Projectile display name ('Mfr Product (W gr)') or projectile.csv id",
      "maxLength": 200,
      "minLength": 1,
      "title": "Bullet",
      "type": "string"
    },
    "powder": {
      "description": "Propellant name ('Alliant Blue Dot') or propellant.csv id",
      "maxLength": 200,
      "minLength": 1,
      "title": "Powder",
      "type": "string"
    },
    "charge_gr": {
      "description": "Powder charge in grains (sanity bounds 0.1..200)",
      "maximum": 200,
      "minimum": 0.1,
      "title": "Charge Gr",
      "type": "number"
    },
    "barrel_len_in": {
      "description": "Barrel length in inches",
      "maximum": 60,
      "minimum": 0.5,
      "title": "Barrel Len In",
      "type": "number"
    },
    "cartridge_oal_in": {
      "anyOf": [
        {
          "exclusiveMinimum": 0.2,
          "maximum": 20,
          "type": "number"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "description": "Cartridge overall length in inches (default: caliber max OAL)",
      "title": "Cartridge Oal In"
    },
    "primer": {
      "anyOf": [
        {
          "maxLength": 64,
          "type": "string"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "description": "Primer identity — accepted for forward compatibility; the engine does not model primers yet",
      "title": "Primer"
    },
    "firearm_type": {
      "anyOf": [
        {
          "enum": [
            "auto",
            "revolver",
            "not_revolver"
          ],
          "type": "string"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "description": "Revolver cylinder-gap override: 'auto' (default, engine detects from caliber name), 'revolver', or 'not_revolver' (rifle/pistol)",
      "title": "Firearm Type"
    },
    "powder_temp_c": {
      "anyOf": [
        {
          "maximum": 80,
          "minimum": -60,
          "type": "number"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "description": "Powder temperature in °C (optional; -29..+49 validated band, clamped outside). None = ambient (default).",
      "title": "Powder Temp C"
    },
    "weight_gr": {
      "anyOf": [
        {
          "maximum": 2000,
          "minimum": 1,
          "type": "number"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "description": "Bullet weight override in grains (optional). For cast bullets: same mold, different alloy, different weight (a LEE C358-158-SWC can drop 137 gr in pewter/tin vs 158 gr catalog nominal). None = catalog nominal. >20% off nominal emits BULLET_WEIGHT_OUTLIER.",
      "title": "Weight Gr"
    }
  },
  "required": [
    "caliber",
    "bullet",
    "powder",
    "charge_gr",
    "barrel_len_in"
  ],
  "additionalProperties": false,
  "description": "/v1/solve DTO: same input contract as the web simulate request, but\nthe unit-suffix policy is ENFORCED — unknown/unsuffixed/alternate unit\nfields are 422 (INVALID_UNITS), never silently ignored."
}
🟡generate_load_ladder(caliber, bullet, powder, barrel_len_in, primer, ...)

PREFERRED for load development: generate a work-up ladder (>=5 rungs required — coarser requests are refused LADDER_TOO_COARSE, never silently interpolated) from the published-reference or charge-only bookends down, with per-rung trajectory nodes and the full safety envelope. Requires an API key or subscriber token — anonymous callers are refused pre-compute. Returns the SAME envelope as POST /v1/ladder. SAFETY (verbatim policy): Returns modeled pressure and velocity from a physics solver, plus a safety envelope. This is NOT published load data. Always present the envelope, warnings, and disclaimer to the user; never state a single charge weight as a recommendation. Pressure fields (p_max_bar, p_max_psi, saami_max_bar) are modeled compliance-vs-SAAMI-ceiling indicators on the model's CUP-equivalent scale, while pressure_percent_saami is reported piezo-equivalent: the percent equals p_max_bar x 1.2783 / saami_max_bar, so it is NOT peak / ceiling as served. Not measured proof pressures and not accuracy-validated numbers: the validation corpus is velocity-only. Treat them as position relative to the ceiling, with real-world spread unknown. not_for_loading_decisions_without_published_data: this result is a model output. Do not work up a load from it alone — cross-check against published data for your exact components before loading.

Input Schema

{
  "type": "object",
  "properties": {
    "caliber": {
      "description": "Cartridge name or caliber.csv id",
      "maxLength": 200,
      "minLength": 1,
      "title": "Caliber",
      "type": "string"
    },
    "bullet": {
      "description": "Projectile display name or projectile.csv id",
      "maxLength": 200,
      "minLength": 1,
      "title": "Bullet",
      "type": "string"
    },
    "powder": {
      "description": "Propellant name or propellant.csv id",
      "maxLength": 200,
      "minLength": 1,
      "title": "Powder",
      "type": "string"
    },
    "barrel_len_in": {
      "description": "Barrel length in inches",
      "maximum": 60,
      "minimum": 0.5,
      "title": "Barrel Len In",
      "type": "number"
    },
    "primer": {
      "anyOf": [
        {
          "maxLength": 64,
          "type": "string"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "description": "Primer identity — accepted for forward compatibility",
      "title": "Primer"
    },
    "charge_gr": {
      "anyOf": [
        {
          "maximum": 200,
          "minimum": 0.5,
          "type": "number"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "description": "Current charge (enables sensitivity + next-rung marker)",
      "title": "Charge Gr"
    },
    "n_rungs": {
      "default": 7,
      "description": "Number of ladder rungs (3–10, default 7)",
      "maximum": 10,
      "minimum": 3,
      "title": "N Rungs",
      "type": "integer"
    },
    "cartridge_oal_in": {
      "anyOf": [
        {
          "exclusiveMinimum": 0.2,
          "maximum": 20,
          "type": "number"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "description": "Cartridge overall length in inches (default: caliber max OAL)",
      "title": "Cartridge Oal In"
    },
    "firearm_type": {
      "anyOf": [
        {
          "enum": [
            "auto",
            "revolver",
            "not_revolver"
          ],
          "type": "string"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "description": "Revolver cylinder-gap override: 'auto' (default), 'revolver', or 'not_revolver' (rifle/pistol)",
      "title": "Firearm Type"
    },
    "powder_temp_c": {
      "anyOf": [
        {
          "maximum": 80,
          "minimum": -60,
          "type": "number"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "description": "Powder temperature in °C (optional; -29..+49 validated band)",
      "title": "Powder Temp C"
    }
  },
  "required": [
    "caliber",
    "bullet",
    "powder",
    "barrel_len_in"
  ],
  "additionalProperties": false,
  "description": "/v1/ladder DTO: same input contract as the web ladder request\n(SolveRequest pattern), unit-suffix policy ENFORCED via\nextra=forbid + the INVALID_UNITS mapping in validation_problem."
}
🔴trajectory(caliber, bullet, powder, charge_gr, barrel_len_in, ...)

Trajectory / drop table: point-mass (3-DOF) exterior solve fed by the modeled muzzle velocity for an exact cartridge+bullet+powder+charge spec (or an explicit muzzle_velocity_fps override). Returns range rows (drop, velocity, energy, windage) plus the model assumptions. Beta keys get the table to 300 yd (the same PREFIX the web free tier gets); subscriber keys get the full table. No pressure figures on this surface. SAFETY (verbatim policy): Returns modeled pressure and velocity from a physics solver, plus a safety envelope. This is NOT published load data. Always present the envelope, warnings, and disclaimer to the user; never state a single charge weight as a recommendation. Pressure fields (p_max_bar, p_max_psi, pressure_percent_saami, saami_max_bar) are modeled compliance-vs-SAAMI-ceiling indicators, not measured proof pressures and not accuracy-validated numbers: the validation corpus is velocity-only. Treat them as position relative to the ceiling, with real-world spread unknown. not_for_loading_decisions_without_published_data: this result is a model output. Do not work up a load from it alone — cross-check against published data for your exact components before loading.

Input Schema

{
  "type": "object",
  "properties": {
    "caliber": {
      "description": "Cartridge name or caliber.csv id",
      "maxLength": 200,
      "minLength": 1,
      "title": "Caliber",
      "type": "string"
    },
    "bullet": {
      "description": "Projectile display name ('Mfr Product (W gr)') or projectile.csv id",
      "maxLength": 200,
      "minLength": 1,
      "title": "Bullet",
      "type": "string"
    },
    "powder": {
      "description": "Propellant name or propellant.csv id",
      "maxLength": 200,
      "minLength": 1,
      "title": "Powder",
      "type": "string"
    },
    "charge_gr": {
      "description": "Powder charge in grains",
      "maximum": 200,
      "minimum": 0.1,
      "title": "Charge Gr",
      "type": "number"
    },
    "barrel_len_in": {
      "description": "Barrel length in inches",
      "maximum": 60,
      "minimum": 0.5,
      "title": "Barrel Len In",
      "type": "number"
    },
    "cartridge_oal_in": {
      "anyOf": [
        {
          "exclusiveMinimum": 0.2,
          "maximum": 20,
          "type": "number"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "title": "Cartridge Oal In"
    },
    "primer": {
      "anyOf": [
        {
          "maxLength": 64,
          "type": "string"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "title": "Primer"
    },
    "firearm_type": {
      "anyOf": [
        {
          "enum": [
            "auto",
            "revolver",
            "not_revolver"
          ],
          "type": "string"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "title": "Firearm Type"
    },
    "powder_temp_c": {
      "anyOf": [
        {
          "maximum": 80,
          "minimum": -60,
          "type": "number"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "title": "Powder Temp C"
    },
    "weight_gr": {
      "anyOf": [
        {
          "maximum": 2000,
          "minimum": 1,
          "type": "number"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "description": "Bullet weight override in grains (optional). For cast bullets: same mold, different alloy, different weight (a LEE C358-158-SWC can drop 137 gr in pewter/tin vs 158 gr catalog nominal). None = catalog nominal. >20% off nominal emits BULLET_WEIGHT_OUTLIER.",
      "title": "Weight Gr"
    },
    "muzzle_velocity_fps": {
      "anyOf": [
        {
          "maximum": 5000,
          "minimum": 300,
          "type": "number"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "description": "Override; default = the engine's v_max_fps for this load",
      "title": "Muzzle Velocity Fps"
    },
    "bc_lb_in2": {
      "anyOf": [
        {
          "maximum": 2,
          "minimum": 0.01,
          "type": "number"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "description": "Ballistic coefficient override; default = catalog g7bc (else g1bc) for the bullet",
      "title": "Bc Lb In2"
    },
    "drag_function": {
      "anyOf": [
        {
          "pattern": "^(G1|G7)$",
          "type": "string"
        },
        {
          "type": "null"
        }
      ],
      "default": null,
      "description": "Drag standard of `bc_lb_in2`; default G1 for an override, otherwise whichever catalog BC was used",
      "title": "Drag Function"
    },
    "zero_range_yd": {
      "default": 100,
      "maximum": 500,
      "minimum": 10,
      "title": "Zero Range Yd",
      "type": "number"
    },
    "sight_height_in": {
      "default": 1.5,
      "maximum": 4,
      "minimum": 0.05,
      "title": "Sight Height In",
      "type": "number"
    },
    "max_range_yd": {
      "default": 500,
      "maximum": 2000,
      "minimum": 100,
      "title": "Max Range Yd",
      "type": "number"
    },
    "step_yd": {
      "default": 50,
      "maximum": 200,
      "minimum": 5,
      "title": "Step Yd",
      "type": "number"
    },
    "wind_mph": {
      "default": 0,
      "description": "Full-value crosswind, left -> right",
      "maximum": 50,
      "minimum": 0,
      "title": "Wind Mph",
      "type": "number"
    },
    "temp_c": {
      "default": 15,
      "maximum": 60,
      "minimum": -40,
      "title": "Temp C",
      "type": "number"
    },
    "pressure_hpa": {
      "default": 1013.25,
      "maximum": 1200,
      "minimum": 500,
      "title": "Pressure Hpa",
      "type": "number"
    }
  },
  "required": [
    "caliber",
    "bullet",
    "powder",
    "charge_gr",
    "barrel_len_in"
  ],
  "additionalProperties": false,
  "description": "POST /api/trajectory + MCP trajectory tool DTO — the single source\nof validation truth for BOTH transports (the MCP tool's input schema\nis generated from this class, so what an agent sees is what the\nserver enforces).\n\nLoad fields mirror SimulateRequest (same finite-float / bound\nsemantics); the exterior-ballistics fields are trajectory-specific.\nextra=\"forbid\" mirrors the /v1 unit-suffix discipline: unknown\nfields are 422, never silently ignored."
}
🟢get_cartridge_spec(cartridge)

Look up ONE cartridge in the served component database (census: mode != 'hidden' AND geloescht == 0) by name, CIP name, alternate name, or id — returns the published dimensional spec (pmax_bar, case volume, bore/case dimensions, max OAL). Identity + published dimensional metadata only — NOT load data (rights-class discipline): no charge/velocity/pressure values are served by this tool.

Input Schema

{
  "type": "object",
  "properties": {
    "cartridge": {
      "type": "string",
      "description": "Cartridge name, CIP name, alternate name, or numeric id"
    }
  },
  "required": [
    "cartridge"
  ]
}
🟢list_powders(manufacturer)

List propellants in the served database (optionally filtered by manufacturer substring), with the GRT attributes the solver uses (Ba, Qex). Identity + published dimensional metadata only — NOT load data (rights-class discipline): no charge/velocity/pressure values are served by this tool.

Input Schema

{
  "type": "object",
  "properties": {
    "manufacturer": {
      "type": "string",
      "description": "Optional manufacturer substring filter (e.g. 'Hodgdon')"
    }
  }
}
🟢check_component_compatibility(cartridge, powder, bullet_gr)

Check whether a cartridge+powder pair RESOLVES in the served database and whether the published-reference corpus contains a row for the pair (nearest-bullet membership — the same membership that decides a ladder's basis). Answers membership and canonical identity ONLY; it never serves the corpus row's numbers. Identity + published dimensional metadata only — NOT load data (rights-class discipline): no charge/velocity/pressure values are served by this tool.

Input Schema

{
  "type": "object",
  "properties": {
    "cartridge": {
      "type": "string"
    },
    "powder": {
      "type": "string"
    },
    "bullet_gr": {
      "type": "number",
      "description": "Bullet weight in grains (optional; enables corpus-membership answer)"
    }
  },
  "required": [
    "cartridge",
    "powder"
  ]
}

Community

Rate this Server

Evidence

Recent observations

verifiedversion not recorded6 tools